Brodhead Pietenpol Association

Posted: **Mon Oct 05, 2009 12:49 am**

Original Posted By: jorge lizarraga
Hi dear Piets,- well, after to let the piet for almost two years now i have time for work on it, i will clean all (to many dust) ,finish the fuel tank and install it...JorgeDonde estas ubicado?- yo estoy en la Ciudad de Mexico, tengo ya algunos a=F1os trabajando en mi Pietenpol...SaludosJavier Cruzpd. good translation Oscarle, List Admin.=0A=0A=0A ________________________________________________________________________________Date: Tue, 6 Oct 2009 23:00:40 -0700 (PDT)

Posted: **Tue Oct 06, 2009 7:57 pm**

Original Posted By: John Fay
Subject: Pietenpol-List: Re: Baltic birch plywood

Posted: **Tue Oct 06, 2009 8:51 pm**

Original Posted By: Robert Ray
Subject: Re: Pietenpol-List: How many flying with Riblett 612?

Posted: **Tue Oct 06, 2009 9:54 pm**

Original Posted By: Robert Ray
Subject: Re: Pietenpol-List: Re: Baltic birch plywood

Posted: **Tue Oct 06, 2009 10:10 pm**

Original Posted By: "Bill Church"

Posted: **Tue Oct 06, 2009 11:25 pm**

Original Posted By: jorge lizarraga
I followed Chuck Gantzer's lead and installed two "intercostal" uprights per spar(4 per rib). Probably overkill, but it is done.--------Mark - working on wingsRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Tue, 6 Oct 2009 22:53:23 -0700 (PDT)

Brodhead Pietenpol Association

Pietenpol-List: Re: Baltic birch plywood

Re: Pietenpol-List: translating Jorge's post- #1

Pietenpol-List: Re: Baltic birch plywood

Re: Pietenpol-List: How many flying with Riblett 612?

Re: Pietenpol-List: Re: Baltic birch plywood

RE: Pietenpol-List: Re: Baltic birch plywood

Pietenpol-List: Re: intercostals wing rib