Brodhead Pietenpol Association

Original Posted By: Tim Willis
All,I submit for your critique 2 comps I have created.These can be resized and placed almost anywhere.enjoy--------"Be who you are and say what you think, those that mind don't matter, andthose that matter don't mind" Dr. SeussRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/mobi ... ______Date: Sat, 6 Mar 2010 20:40:34 -0600 (GMT-06:00)

Original Posted By: "mr-fix-all"
Ben, I'm waiting with baited breath, to hear the flying data on the 612 wings that arein the works. The glide is not anyway near the glide you are experiencing ,nor the sink rate as fast.Pieti Lowell] I am flying my hours off and after 5 hours I am really impressed on how my shiphandles. It really likes 85 mph at 2500rpm. and will easily go to 95 RPM at2900 rpm. On final approach to landing I am trying to get used the sink ratefor landing. I like to land power off like I was taught., but i FIND THAT ISNOT POSSIBLE. I have been reading about dimple tape as a somewhat solution.Have any of you experienced pietenpollers tried this and does it work? Thanksguys, Gardiner Mason [/quote][/quote]Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Coverall Comps

Original Posted By: "mr-fix-all"
It is possible that you could have these made into a heat transfer, these are possiblesilkscreenings for the coveralls that have been discussed here. With some research I could silk screen this onto a fabric swatch that could beaffixed to your finished craft. I will be posting other comps as I complete them.Jake--------"Be who you are and say what you think, those that mind don't matter, andthose that matter don't mind" Dr. SeussRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Coverall Comps

Original Posted By: "Clif Dawson"
Here is my 3rd spin Jake--------"Be who you are and say what you think, those that mind don't matter, andthose that matter don't mind" Dr. SeussRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/piet ... __________

Original Posted By: "mr-fix-all"
The longerons and wing rib caps are carefully chosentrim material from lumber yards. I was extremelypicky so I made regular rounds to five yards. Thespar material is very unusual and only comes in 5"and 6" widths. I found it in a higher end place thatcarries better materials usually.The longerons are 1 1/16" square stuff that is used asa backing when building up fancy, complicatedmoldings.Clif> > Cliff,> Where did you go to find that wood?> Thanks> Mike Townsley________________________________________________________________________________Subject: Pietenpol-List: Re: Coverall Comps

Original Posted By: Kip and Beth Gardner
4th and final unless someone has other suggestions.Jake--------"Be who you are and say what you think, those that mind don't matter, andthose that matter don't mind" Dr. SeussRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/piet ... __________

Original Posted By: mr-fix-all
Mobile Oil is still in business, so you should be careful how you use their logo, they may take offense!As for the overalls, I would personally prefer that the logo look more like something that might have been worn by a worker at a factory, rather than a tribute to Mr. Peitenpol. Just my 2 cents,Gene ----- Original Message -----

Original Posted By: airlion