Brodhead Pietenpol Association

Original Posted By: "chase143(at)aol.com"
Dan; the spacers go between the rubber donuts on the engine mount points and theflats on the engine mount, same as washers. As mentioned in another post inthis thread, aluminum should we acceptable there... 6061-T6 has a Brinnell hardnessof 95; normalized 4130 steel has a BHN of 92.--------Oscar ZunigaSan Antonio, TXAir Camper NX41CCRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Motivating cross country trip

Original Posted By: Kenneth Howe
I apologize if you have already seen these. But this has to be one of the mostmotivating cross country picture stories I have seen, and includes some greatBrodhead pictures.Thanks again to Doug Reeves for capturing this great trip.Stevehttp://www.vintageflying.com/page24.html------ ... et.comRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

Original Posted By: mike Hardaway
Now I just 'wasted' a bunch of my work day going through that site. WOW!KenOn Oct 7, 2010, at 8:25 AM, chase143(at)aol.com wrote:> > I apologize if you have already seen these. But this has to be one of the most motivating cross country picture stories I have seen, and includes some great Brodhead pictures.> Thanks again to Doug Reeves for capturing this great trip.> Steve> > http://www.vintageflying.com/page24.html> > --------> Steve> www.mypiet.com> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 026#315026> > > > > > > > > > ________________________________________________________________________________Date: Thu, 7 Oct 2010 10:24:35 -0700Subject: Re: Pietenpol-List: Motivating cross country trip

Original Posted By: shad bell