Brodhead Pietenpol Association

Original Posted By: Kimball Isaac
This looks like Dan Plett's airplane...What happened, Dan?--------Billy McCaskillUrbana, ILtail section almost done, starting on ribs soonRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 5 Jan 2011 08:17:31 -0800Subject: Re: Pietenpol-List: Re: Additional questions regarding split axle gearfittings

Original Posted By: Rick Holland
Subject: Re: Pietenpol-List: Re: Additional questions regarding split axle gearfittings

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Tom,I will give $25 for your old gear. Just kidding! That is a bummer, guessI'm glad I move at a slow pace. I've RE-built fittings, horns, pedals manytimes; hopefully I will do the V's once! But I doubt it.Take care Buddy!JackDSM _____

Original Posted By: "899PM"
Brad,Call me sometime.....nine two zero seven two eight zero six three zero.Far too much info to put into written form.--------PAPA MIKERead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: New guy with Model A questions

Original Posted By: "TOM STINEMETZE"
http://www.youtube.com/watch?v=G5R8OvAm ... ------PAPA MIKERead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 05 Jan 2011 13:27:56 -0600

Original Posted By: TOM STINEMETZE
Any chance that I could get a copy of this article. I=99m getting ready to build my gear. I=99ve joined the BPA, but did not receive the newsletters due to seasonal moving. Would rejoin if the newsletter was available online.Tim White

Original Posted By: aa5flyer(at)gmail.com
I could scan the article and put it on as an attachment if you would like. Let me know. Chuck ----- Original Message -----

Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: Re: Additional questions regarding split axle gearfittings

Original Posted By: aa5flyer(at)gmail.com
Disregard my last post. I never considered the copyright issue. Why don't you E-mail Doc Moser at bpan(at)tds.net and ask if you can buy a copy of the magazine. Chuck ----- Original Message -----

Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: Re: Additional questions regarding split axle gearfittings

Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: Re: Additional questions regarding split axle gearfittings

Original Posted By: Ryan M
It's in the Jan 2011 issue -- the one that just hit the stands. ----- Original Message -----

Original Posted By: Charles Campbell
Mr. Moser,Is it possible to get a copy of this article?Tim White

Original Posted By: "Brett Phillips"
Pieti Lowell wrote:> The questions that you ask require many many answers and to put a standard Aon a Bi Plane will take much hopping up to get her flying at Pietenpol specs,> I fly a Ford B , Modified to swing a Prop that is standard on a Lambert 90 HP.> I have many answers on what a stock Ford A will and wont do. If you Email meI will try to do your questions Justice.> I have built many types of engines up from scratch, Radials, to Fords all onpietenpols, with flight specs Via actual testing. > > Pieti LowellPM sent. --------First rule of ground school: This is the ground... don't hit it going fast.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: New guy with Model A questionsDate: Wed, 05 Jan 2011 21:11:53 -0500