Pietenpol-List: What luck . . .
Posted: Wed Jan 12, 2011 6:44 pm
Original Posted By: "tdudley(at)umn.edu"
Hi Shad - I will certainly try that before I yank the head! I've run 100LL throughthe motor exclusively.Forgive a dumb question, please: pull the plug, remove the valve keeper, push thevalve into the cylinder a little bit, apply the valve compound around the seat(with what?), then move the valve against the seat in a circle? You knowa lot more about mechanicin' than I do.I have every intention of making Brodhead. The only thing that would screw itup is work, but hopefully it'll happen. Going to do my best.Thanks,Kevin--------Kevin "Axel" PurteeNX899KPAustin/Georgetown, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: What luck . . .
Hi Shad - I will certainly try that before I yank the head! I've run 100LL throughthe motor exclusively.Forgive a dumb question, please: pull the plug, remove the valve keeper, push thevalve into the cylinder a little bit, apply the valve compound around the seat(with what?), then move the valve against the seat in a circle? You knowa lot more about mechanicin' than I do.I have every intention of making Brodhead. The only thing that would screw itup is work, but hopefully it'll happen. Going to do my best.Thanks,Kevin--------Kevin "Axel" PurteeNX899KPAustin/Georgetown, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: What luck . . .