Original Posted By: KM Heide CPO/FAAOP
Got my wingtips on and ailerons cut out in the last day or so...glued some 1/8 ply to the inboard side of the ailerons... nothing in the F & G manual about what to do there... may add capstrip to the insideof the ply..Read this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/tip_ ... ______Date: Mon, 28 Feb 2011 13:11:12 -0800 (PST)
Pietenpol-List: weekend
Pietenpol-List: Re: Rudder bar and forward controls
Original Posted By: TOM MICHELLE BRANT
One quick comment to Michael regarding the rudder bar.You write that you used "standard tubing - .035" wall SS".Just be aware that stainless steel tubing typically has only half the Yield Strengthof 4130 - and in this case, the plans specifically mention to use chro-molytubing for the rudder bar.Bill C.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
One quick comment to Michael regarding the rudder bar.You write that you used "standard tubing - .035" wall SS".Just be aware that stainless steel tubing typically has only half the Yield Strengthof 4130 - and in this case, the plans specifically mention to use chro-molytubing for the rudder bar.Bill C.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________