Brodhead Pietenpol Association

Original Posted By: "kevinpurtee"
Thank goodness it's over. I've missed you, Jack.--------Kevin "Axel" PurteeNX899KPAustin/Georgetown, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Corvair Oil Filler Location

Original Posted By: "Charles Campbell"
I've purchased an after market part from William Wynne to ease the task of gettingoil to the new 5th bearing. I've lost the stock oil filler port in the process.I'd like to know how those of you who have a similar setup have handledit, please.Thanks,Kevin--------Kevin "Axel" PurteeNX899KPAustin/Georgetown, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

Original Posted By: Jim Markle
It was completed in 2002. Has about 200 hrs on it. Asking $5,000.Will post some pictures as soon as I figure out how to get them from my camerato the forum.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Sun, 20 Mar 2011 10:50:42 -0500 (GMT-05:00)

Original Posted By: "olflyr45"
Kevin:Most usually the oil filler spout is welded on to the valve cover.http://www.flycorvair.com/44721.jpghttp ... 97.jpgalso on ocasion on top cover.http://www.n56ml.com/corvair/00052818.jpgalso need to add valve cover breather tubehttp://www.flycorvair.com/44934.jpghttp://www. ... jpgMichael in Maine----- Original Message ----- >> I've purchased an after market part from William Wynne to ease the task ofgetting oil to the new 5th bearing. I've lost the stock oil filler port inthe process. I'd like to know how those of you who have a similar setuphave handled it, please.>> Thanks,> Kevin>________________________________________________________________________________Subject: Pietenpol-List: Re: Project for sale