Brodhead Pietenpol Association

Original Posted By: Mark Roberts
Thanks Guys!Believe it or not, the hardest part isn't the building, it is the compilation ofthe steel parts needed to order from ACS!I have spent the last few hours looking at all I need to order to build the fusecontrol stuff. Part of the fun!Vic, I will call you tonight as I see you called when I was away.MarkRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 13 Jun 2012 22:46:25 -0700Subject: Pietenpol-List: AN Bolt deciphering - Resource

Original Posted By: Mark Roberts
Subject: Re: Pietenpol-List: AN Bolt deciphering - Resource

Original Posted By: Ben Charvet

Original Posted By: Michael Perez

Original Posted By: Mark Roberts
Mark, the main difference is price. In the ACS listing an AN3-7A (undrilled) is $0.12 -- an AN3-7 (drilled) is $0.52. That 40-cent difference would build up when you start ordering your hardware. Chuck ----- Original Message -----

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Mark,Aside from the cost difference, my earlier version of AC43.13 states,".Bolts 5/16" diameter and over with cotter pinholes may be used withself-locking nuts." Inference from that, along with my recollection from A&Pschool, is that smaller bolts with cotter pinholes would not be used withfiber locknuts.Gary from Cool _____