Brodhead Pietenpol Association

Original Posted By: Jack
Subject: Pietenpol-List: Oxy/Act torchGroup,I have a nice Oxy/Act torch set up with Victor torches and attachments, but I findmy large torch handle is a little awkward to practice my welding with. Severalyears ago at Air-Venture my brother and I attend a couple of the weldingclasses and they had mini torches for Oxy/Act welding. I don't know if they wereVictor brand or Uniweld. Can anyone recommend a good mini torch? Name brandand model number? Thanks.BrianSLC-UTRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Covering-drain holes

Original Posted By: helspersew(at)aol.com
All, for the drain holes...do you do them before or after paint? I don't plan onusing plastic grommets, just a soldering iron.ThanksSent from my iPadJack Textor________________________________________________________________________________Subject: Re: Pietenpol-List: Covering-drain holes

Original Posted By: Jack
Did mine after. Worked well. Measure twice, melt once.Dan HelsperPuryear, TN-----Original Message-----

Original Posted By:> Jack
Did mine after, too...no grommets.GarySent from my iPhoneOn Feb 14, 2013, at 10:58 AM, helspersew(at)aol.com wrote:> Did mine after. Worked well. Measure twice, melt once.> > > Dan Helsper> Puryear, TN> -----Original Message-----

Original Posted By: Ryan M