Brodhead Pietenpol Association

Original Posted By: John Egan
Thanks, Ray! 'Course, it would be a federal offense for you to come and take it back! ;-)Sent from my iPhoneOn Jun 26, 2013, at 8:10 AM, Ray Krause wrote:> That a way to keep 'em in the air, Jim. Gary, I have a wing you could use, just needs covering! It will be more than a year till I need it.> > Ray Krause > > Sent from my iPad> > On Jun 26, 2013, at 8:01 AM, Ken Bickers wrote:> >> Pietenpeople are the best! >> >> >> On Wed, Jun 26, 2013 at 8:57 AM, Bkemike wrote:>>> >>> Jim Boyer is my hero!>>> >>> Sent from a tabula bruja.>>> >>> >>> >>> >>> On Jun 26, 2013, at 7:40 AM, Gary Boothe wrote:>>> >>> > New spar, thanks to Jim Boyer, who refuses payment!>>> >>>> > Gary>>> > >>> >>>> > Sent from my iPhone>>> > >>> >>>> >>>> > >>> >>> >>> ==========>>> st" target="_blank">http://www.matronics.com/Navigator?Pietenpol-List>>> ==========>>> http://forums.matronics.com>>> ==========>>> le, List Admin.>>> ="_blank">http://www.matronics.com/contribution>>> ==========>> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Date: Wed, 26 Jun 2013 11:17:58 -0500Subject: Pietenpol-List: Oil Temp Bulb and Capillary

Original Posted By: owner-pietenpol-list-server(at)matronics.com
John,I doubt an automotive oil temp bulb would have the right fittings to fitinto the oil screen assembly, but it might. I think the oil screen assemblyhas a 5/8-18 thread. If the automotive temp bulb has the same size threadit should work. On mine I just bought one from ACS, with a 72" capillarytube and it worked fine.Jack PhillipsNX899JPSmith Mountain Lake, Virginia _____

Original Posted By: John Egan
Subject: Re: Pietenpol-List: Oil Temp Bulb and Capillary

Original Posted By: Ray Krause
John,I bought an automotive oil press/temp gauge set from Auto Zone and the fittingsthat came with it adapted to the 5/8-18 thread on the oil screen just fine. I even ran the engine, low power only, and it did not leak. Problem is the capillarytube did not reach to my rear cockpit. I ended up buying one from Wag-Aero(A-007-000) and the 5' tube reaches with no problem.--------David GallagherZodiac 601 XL-B: flying, 250+ hours nowNext project under construction: Finish my father's AircamperRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

Original Posted By: owner-pietenpol-list-server(at)matronics.com
P/N 10-11700 $71.00 in ACS 2011 catalog, which is the latest I haveJack PhillipsNX899JPSmith Mountain Lake, Virginia _____

Original Posted By:> owner-pietenpol-list-server(at)matronics.com
theRocket has the same gauge.http://www.aircraftspruce.com/catalog/i ... s1.phpJohn HofmannVice-President, Information TechnologyThe Rees Group, Inc.2424 American LaneMadison, WI 53704Phone: 608.443.2468 ext 150Fax: 608.443.2474Email: jhofmann(at)reesgroupinc.comOn Jun 27, 2013, at 9:50 AM, "Jack Phillips" wrote:> P/N 10-11700 $71.00 in ACS 2011 catalog, which is the latest I have> > Jack Phillips> NX899JP> Smith Mountain Lake, Virginia>

Original Posted By: Michael Groah

Original Posted By: John Egan
Dave;The Begich Middle School students there in Anchorage have an Aerial project thatthey are working on (St. Croix' biplane adaptation of the Air Camper). I thinkRob Stapleton was the guy who put that together, but I don't know for sure.Since school is out for the summer, I'm not sure who you might try, but itmight be interesting.--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 powerRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Thu, 27 Jun 2013 12:28:54 -0500Subject: Re: Pietenpol-List: Oil Temp Bulb and Capillary