Brodhead Pietenpol Association

Original Posted By: "Gary Boothe"
With all the copies of plans available out there, could someone tell me aboutthe quality of the plans available on the official piet site. Are they a lotbetter than the original printed plans from the 1930 reproduction by the EAA.How about the corvair engine supplement,good detail or drawing from the 1960's.Thanks,Bill E________________________________________________________________________________

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Bill,I'm not familiar with the reproduction plans from the EAA. I purchased myplans from Don Pietenpol and they are quite adequate. I also purchased theCorvair supplemental, which was useful, but not as a plan for building theactual mount. That mount was designed for a Corvair with the blower on top.I am hoping you will be following the William Wynne Conversion(www.flycorvair.com) and it will be best to use his mount or mount plans. Gary BootheNX308MB