Pietenpol-List: =?utf-8?Q?4.jpg_640=C3=97480_pixels?
Posted: Fri Sep 20, 2013 11:20 pm
Original Posted By: Ray Krause
This could be a viable work-around if I end up needing it.Thanks,Ray KrauseSent from my iPad> On Sep 20, 2013, at 5:11 PM, "GNflyer" wrote:> > > what about making a set of spacer spools between the firewall and mount to getthe same thing done if you ended up needing the weight shift? I realize thatwould not necessarily mean the cowl would still work but it could allow forsome trial offset of thrust as well without a lot of extra work except longerbolt to do some weighing.Raymond> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 912#408912> > > > > > > > > > ________________________________________________________________________________Subject: Pietenpol-List: =?utf-8?Q?4.jpg_640=C3=97480_pixels?
This could be a viable work-around if I end up needing it.Thanks,Ray KrauseSent from my iPad> On Sep 20, 2013, at 5:11 PM, "GNflyer" wrote:> > > what about making a set of spacer spools between the firewall and mount to getthe same thing done if you ended up needing the weight shift? I realize thatwould not necessarily mean the cowl would still work but it could allow forsome trial offset of thrust as well without a lot of extra work except longerbolt to do some weighing.Raymond> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 912#408912> > > > > > > > > > ________________________________________________________________________________Subject: Pietenpol-List: =?utf-8?Q?4.jpg_640=C3=97480_pixels?