Brodhead Pietenpol Association

Posted: **Wed Oct 30, 2013 10:18 am**

Original Posted By: "AircamperN11MS"
Same (essentially) post, different thread:Use round tubing... buy some "drip edge" from the aviation department at Home Depot.Bend the 90-degree bend flatter, attach to round tubing with fabric. Paintto simulate wood if desired.--------Brad "DOMIT" SmithFirst rule of ground school: This is the ground... don't hit it going fast.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: crash at Boerne Stage (off topic)

Posted: **Wed Oct 30, 2013 1:26 pm**

Original Posted By: "AircamperN11MS"
Oscar,This is what I found.http://www.news4sanantonio.com/news/fea ... -----Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: crash at Boerne Stage (off topic)

Posted: **Wed Oct 30, 2013 1:30 pm**

Original Posted By: Steven Dortch
More info,http://www.aviationdb.com/Aviation/Airc ... -----Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 30 Oct 2013 15:03:56 -0500Subject: Re: Pietenpol-List: Re: crash at Boerne Stage (off topic)