Brodhead Pietenpol Association

Original Posted By: "tools"
Douwe,Since I'm at the office, I can't look up the weight of your plane... so what isit?Also, do you know which cam is in your C-90?Thanks,--------Tom KreinerRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Shop/Hangar open house Feb 20 to 24

Original Posted By: "Don Emch"
A quick reminder about an open house in Chickamauga GA later this month.I think there's about 20 or so folks fairly well committed to coming with a fewprojects lined up. Babbitt pouring, several machining projects, we have a couplelogs about 3 feet in diameter to mill up on the sawmill, quite a few folksare bringing firearms to play with (at least one automated, bring 9mm if thatinterests you...), good chance we'll be doing an annual on 2RN, several pietfolks are coming and going to try fabricating and welding up some control horns.The runway isn't compacted enough to use yet, so if you're interested in flyingin, I have two private grass strips to point you to within 5 and 10 miles, andLafayette GA at about 10 miles (self serve AVGAS, paved, tie downs on the ramp).We'll get you back and forth.Notice to northerners, while not warm by our standards, it's been in the 50's and60's a lot lately!Cheers,ToolsGot some oysters coming from Savannah, beef from Indiana, possibly some pork grownright here on the property (anyone know how to cook one in the ground?).The address is 335 Castlerock Ln, Chickamauga GA. Folks are still welcome to crashanywhere they can find on the property.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Gardiner's C-85

Original Posted By: "Douwe Blumberg"
Hello Gardiner,You are welcome to call me. (330) 429-5265. If I can't answer right away justleave me a message and I'll get back to you. I don't have the jig right nowand without seeing it in front of me it's kind of hard to figure but you mightbe able to mount your fuselage attach lugs on the outside of the fixture railsto get the 26". Not real sure though. I think Fred Kim has it near Pittsburghright now. Don EmchNX899DERead this topic online here:http://forums.matronics.com/viewtopic.p ... __________