Brodhead Pietenpol Association

Original Posted By: "William Wynne"
Congrats Michael!!!! Another fledgling leaves the nest. No small feat and one very few humans on this planet accomplish. Scott K Sent from my iPhone> On Jul 6, 2014, at 12:29 AM, "Michael Perez" wrote:> > It has been a long time coming, but today I finally soloed! It was great weather for it and after three circuits around the pattern, I did another three solo. I was very surprised that I was not nervous, concerned or worried in any way. Everything felt really good and I was very calm...no different then when driving a car. It all went very well and I could not be more pleased. > > As I mentioned in another thread, tomorrow it is back to trying for my first engine start.> > Mike Perez> Karetaker Aero> Attempting first engine start> > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Subject: Pietenpol-List: A perspective on Carbs, Mags and Certified engines

Original Posted By: "AircamperN11MS"
Mike,Congratulations isn't enough. Good job. Now you need to decide whether you wantto cheat gravity by yourself or build. Tough decision considering we only have24 hours in a day. Keep plugging away. Happy landings,--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: A perspective on Carbs, Mags and Certified engines

Original Posted By: Ray Krause
Hi William,Could you please give me a quick call at first chance. I tried calling the officebut your mail box was full. 661-400-1876. Regards,--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________

Original Posted By: Michael Perez

Original Posted By: Michael Perez
Mike, that's a mighty nice sound when it finally lights off and runs. On your oil temp, it usually takes some time before I get an indication and mine usually only indicates 140 to 150 during the summer. In the winter, it struggles to get to 120. Matt Paxton-----Original Message-----