Original Posted By: "David B. Schober"
You folks who asked for a copy of the table on wood from AC 43.13: I'mhaving challenges with one scanner and got garbage today, but will get thecaptures tomorrow on a scanner that I KNOW works properly. I'll post themtomorrow evening, to the Pietenpol group, or if that's not possible, to eachof you individually.Mike________________________________________________________________________________
Pietenpol-List: Trouble with scanner
Pietenpol-List: Re: Trouble with scanner
Original Posted By: Ken Beanlands
I can't comprehend anyone trying to build an airplane without a reference likeAC43.13-1a &2a. To spend money for wood, tools, engines, steel . . . and be tocheap to spend $18.00 to $20.00 on one of the best reference books around whenit comes to aircraft inspection, alteration and building just doesn't makesense.AC43.13-1a Acceptable Methods, Techniques, and Practices - Aircraft Inspectionand Repair and AC43.13-2a Acceptable Methods, Techniques, and Practices -Aircraft Alterations are available from the U.S. Government Printing Office oracombined reprint is available from Aviation Book Company, Jeppesen, AircraftSpruce and many other sources.Michael Hinchman wrote:> You folks who asked for a copy of the table on wood from AC 43.13: I'm> having challenges with one scanner and got garbage today, but will get the> captures tomorrow on a scanner that I KNOW works properly. I'll post them> tomorrow evening, to the Pietenpol group, or if that's not possible, to each> of you individually.>> Mike--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________
I can't comprehend anyone trying to build an airplane without a reference likeAC43.13-1a &2a. To spend money for wood, tools, engines, steel . . . and be tocheap to spend $18.00 to $20.00 on one of the best reference books around whenit comes to aircraft inspection, alteration and building just doesn't makesense.AC43.13-1a Acceptable Methods, Techniques, and Practices - Aircraft Inspectionand Repair and AC43.13-2a Acceptable Methods, Techniques, and Practices -Aircraft Alterations are available from the U.S. Government Printing Office oracombined reprint is available from Aviation Book Company, Jeppesen, AircraftSpruce and many other sources.Michael Hinchman wrote:> You folks who asked for a copy of the table on wood from AC 43.13: I'm> having challenges with one scanner and got garbage today, but will get the> captures tomorrow on a scanner that I KNOW works properly. I'll post them> tomorrow evening, to the Pietenpol group, or if that's not possible, to each> of you individually.>> Mike--David B.Schober, CPEInstructor, Aviation MaintenanceFairmont State CollegeNational Aerospace Education CenterRt. 3 Box 13Bridgeport, WV 26330-9503(304) 842-8300________________________________________________________________________________
Pietenpol-List: Re: Trouble with scanner
Original Posted By: Larry Pasley
Mike:I downloaded the table you sent. It was a two page document that came throughjust fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ --On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, to each>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________
Mike:I downloaded the table you sent. It was a two page document that came throughjust fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ --On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, to each>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________
Pietenpol-List: Re: Trouble with scanner
Original Posted By: Michael D Cuy
Mark,I didn't send it. I am unable to get a clean copy. Some other kind soul didthe deed. My thanks to him.Someone else said that AC 43.13 is a good addition to our builder'slibraries. I agree with that and suggest that everyone who builds airplanesget one. They are only $16.95 from EAA. If someone thinks that's too muchmoney for what it contains, get far away from airplanes, because they are anexpensive hobby!Mike-----Original Message-----BoyntonSent: Thursday, October 22, 1998 11:48 AMSubject: Pietenpol-List: Re: Trouble with scannerMike:I downloaded the table you sent. It was a two page document that camethrough just fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ--On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, toeach>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________
Mark,I didn't send it. I am unable to get a clean copy. Some other kind soul didthe deed. My thanks to him.Someone else said that AC 43.13 is a good addition to our builder'slibraries. I agree with that and suggest that everyone who builds airplanesget one. They are only $16.95 from EAA. If someone thinks that's too muchmoney for what it contains, get far away from airplanes, because they are anexpensive hobby!Mike-----Original Message-----BoyntonSent: Thursday, October 22, 1998 11:48 AMSubject: Pietenpol-List: Re: Trouble with scannerMike:I downloaded the table you sent. It was a two page document that camethrough just fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ--On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, toeach>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________
Pietenpol-List: Re: Trouble with scanner
Original Posted By: "Sayre, William G"
Speaking of information sources. I have the Summit Aviation ComputerizedAviation Reference Library (where I instantly pulled a copy of AC 43.13-1a)It is just about everything that the FAA has ever published on CD. I thinkit is about $99. Saved my butt several times during the FAA inspection too.I was able to quickly pull up the regs regarding NX registration, which myinspector was completely unfamilliar with, and something about seat belts hehad issue with, and I was able to print every AD ever on my A-65 and have ahard copy of compliance there for him too. Easily saved me over $100 onthat day in frustration! You will not be dissapointed. It is availiblethrough sporty's and a couple other mail order houses, or call direct1-800-328-6280 and talk to Jon. OK, ok he is my uncle, but you will notfind a better product.Check,www.summitaviation.comSteve E.-----Original Message-----Michael HinchmanSent: Thursday, October 22, 1998 8:39 PMSubject: Pietenpol-List: RE: Trouble with scannerMark,I didn't send it. I am unable to get a clean copy. Some other kind soul didthe deed. My thanks to him.Someone else said that AC 43.13 is a good addition to our builder'slibraries. I agree with that and suggest that everyone who builds airplanesget one. They are only $16.95 from EAA. If someone thinks that's too muchmoney for what it contains, get far away from airplanes, because they are anexpensive hobby!Mike-----Original Message-----BoyntonSent: Thursday, October 22, 1998 11:48 AMSubject: Pietenpol-List: Re: Trouble with scannerMike:I downloaded the table you sent. It was a two page document that camethrough just fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ--On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, toeach>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________
Speaking of information sources. I have the Summit Aviation ComputerizedAviation Reference Library (where I instantly pulled a copy of AC 43.13-1a)It is just about everything that the FAA has ever published on CD. I thinkit is about $99. Saved my butt several times during the FAA inspection too.I was able to quickly pull up the regs regarding NX registration, which myinspector was completely unfamilliar with, and something about seat belts hehad issue with, and I was able to print every AD ever on my A-65 and have ahard copy of compliance there for him too. Easily saved me over $100 onthat day in frustration! You will not be dissapointed. It is availiblethrough sporty's and a couple other mail order houses, or call direct1-800-328-6280 and talk to Jon. OK, ok he is my uncle, but you will notfind a better product.Check,www.summitaviation.comSteve E.-----Original Message-----Michael HinchmanSent: Thursday, October 22, 1998 8:39 PMSubject: Pietenpol-List: RE: Trouble with scannerMark,I didn't send it. I am unable to get a clean copy. Some other kind soul didthe deed. My thanks to him.Someone else said that AC 43.13 is a good addition to our builder'slibraries. I agree with that and suggest that everyone who builds airplanesget one. They are only $16.95 from EAA. If someone thinks that's too muchmoney for what it contains, get far away from airplanes, because they are anexpensive hobby!Mike-----Original Message-----BoyntonSent: Thursday, October 22, 1998 11:48 AMSubject: Pietenpol-List: Re: Trouble with scannerMike:I downloaded the table you sent. It was a two page document that camethrough just fine. Did I miss some of it? Thanks for the help.Mark Boynton, Phoenix, AZ--On Wed, 21 Oct 1998 19:54:55 Michael Hinchman wrote:>You folks who asked for a copy of the table on wood from AC 43.13: I'm>having challenges with one scanner and got garbage today, but will get the>captures tomorrow on a scanner that I KNOW works properly. I'll post them>tomorrow evening, to the Pietenpol group, or if that's not possible, toeach>of you individually.>>Mike>>http://www.mailexcite.com________________________________________________________________________________