Pietenpol-List: address,ribs

An archive of the Matronics Pietenpol Listserve.
Locked
matronics
Posts: 81779
Joined: Sat Mar 18, 2017 8:29 am

Pietenpol-List: address,ribs

Post by matronics »

Original Posted By: ADonJr(at)aol.com
Many thanks to the gentlemen who answered my question about extending the> center section width. Its good to know I have options that have flown. Any > advice on how to get in touch with Chad Willie?>>Hi Pete: The address you requested is as follows:Chad Willie1139 State Hwy 148Corning IA 50841515-3224041As far as the ribs go I agree with Mike C. That's how I did mine. I shouldlike to point out that the diagonal bracing at the root rib & tip rib ismost important. Absent them & the ribs will distort when the fabric istightened. The plywood facing serves as an attach point for the fabric atthe center section & wing root ribs.Mike B ( Piet N687MB )________________________________________________________________________________
Locked