Original Posted By: "mike sublett"
Subject: Pietenpol-List: Pietenpol-List Digest: 2 Msgs - 05/10/00I finally did it! I ran out of room for my 'toys' and projects. To make room for my rapidly expanding collection of AirBike and Sky Scout parts (to say nothing of a bit of extra money to spend on them), I have to get rid of my O200 project engine. It was on my '66 150 until two years ago, when I was able to buy a low-timer off a wreck. I had plans to rebuild this engine and sell it, but you know how projects go. Anyway, it is an O200-A, pull start, with 2200 SCMOH. One cylinder has less than 40 hours on it, and the engine was running strong when I pulled it. Comes with Slick mags, carb, starter, generator, and vacuum pump.This isn't some dusty 'anchor' sitting in the corner of the shop. I've kept it covered and is clean, as when removed.Oh, yeah...I'm asking $4200 OBO, and I think I have enough wood laying around to build a shipping box for it. Of course shipping will be borne by buyer.E-mail me at Ed0248(at)aol.com. ________________________________________________________________________________
Pietenpol-List: Pietenpol-List Digest: 2 Msgs - 05/10/00
> Pietenpol-List: Pietenpol-List Digest: 2 Msgs - 05/10/00
Original Posted By: "Richard Navratil"
where are you located?>From: Ed0248(at)aol.com>Reply-To: pietenpol-list(at)matronics.com>To: pietenpol-list(at)matronics.com>Subject: Pietenpol-List: Pietenpol-List Digest: 2 Msgs - 05/10/00>Date: Thu, 11 May 2000 10:07:44 EDT>>>I finally did it! I ran out of room for my 'toys' and projects. To make>room for my rapidly expanding collection of AirBike and Sky Scout parts (to>say nothing of a bit of extra money to spend on them), I have to get rid of>my O200 project engine. It was on my '66 150 until two years ago, when I >was>able to buy a low-timer off a wreck. I had plans to rebuild this engine >and>sell it, but you know how projects go. Anyway, it is an O200-A, pull >start,>with 2200 SCMOH. One cylinder has less than 40 hours on it, and the engine>was running strong when I pulled it. Comes with Slick mags, carb, starter,>generator, and vacuum pump.>>This isn't some dusty 'anchor' sitting in the corner of the shop. I've >kept>it covered and is clean, as when removed.>>Oh, yeah...I'm asking $4200 OBO, and I think I have enough wood laying >around>to build a shipping box for it. Of course shipping will be borne by buyer.>>E-mail me at Ed0248(at)aol.com.>>________________________________________________________________________________
where are you located?>From: Ed0248(at)aol.com>Reply-To: pietenpol-list(at)matronics.com>To: pietenpol-list(at)matronics.com>Subject: Pietenpol-List: Pietenpol-List Digest: 2 Msgs - 05/10/00>Date: Thu, 11 May 2000 10:07:44 EDT>>>I finally did it! I ran out of room for my 'toys' and projects. To make>room for my rapidly expanding collection of AirBike and Sky Scout parts (to>say nothing of a bit of extra money to spend on them), I have to get rid of>my O200 project engine. It was on my '66 150 until two years ago, when I >was>able to buy a low-timer off a wreck. I had plans to rebuild this engine >and>sell it, but you know how projects go. Anyway, it is an O200-A, pull >start,>with 2200 SCMOH. One cylinder has less than 40 hours on it, and the engine>was running strong when I pulled it. Comes with Slick mags, carb, starter,>generator, and vacuum pump.>>This isn't some dusty 'anchor' sitting in the corner of the shop. I've >kept>it covered and is clean, as when removed.>>Oh, yeah...I'm asking $4200 OBO, and I think I have enough wood laying >around>to build a shipping box for it. Of course shipping will be borne by buyer.>>E-mail me at Ed0248(at)aol.com.>>________________________________________________________________________________