Original Posted By: "Richard Gillespie"
Just a follow up, fellas.I stripped off the old varnish (which was still sticky after 5 days). Tookabout an hour. Let it dry for a few hours, re-applied a coat of the varnishagain. This time, I let it sit after mixing the catalyst to the base. I letit sit one hour - the can says 30 min to an hour.This time it worked fine. So my non-scientific experiment proved two things:1) This varnish requires a short "induction" time , that is a waitingperiod, after mixing and before application or it will be sticky as flypaper for the rest of eternity.2) Read the darn instructions on this stuff and follow them.By the way, I started covering tonight. Got one elevator done. sure doeslook neat.Later, Bert (who is currently picking Polytac from his fingernails)----- Original Message -----