Original Posted By: lshutks(at)webtv.net (Leon Stefan)
Subject: Re: Pietenpol-List: Re:piano hingesDoes anyone have a source for 6 ft stainless steel closed loop piano hinges(Aircraft Spruce,Wicks neither have)Henry Williams________________________________________________________________________________
Re: Pietenpol-List: Re:piano hinges
Re: Pietenpol-List: Re:piano hinges
Original Posted By:
Henry, Try West Marine boat supplies. Their stuff is high quality forsailing. They have a good selection of hinges.They also have guide hoops( I forget the exact name) that I used for cableshackles. They work great and are a lot cheaperthan AS&S. There was a good discussion on that on here a while back, checkthe archives. If you don't have a West Marinein your area, they will send a free catalog.Carl----- Original Message -----
Henry, Try West Marine boat supplies. Their stuff is high quality forsailing. They have a good selection of hinges.They also have guide hoops( I forget the exact name) that I used for cableshackles. They work great and are a lot cheaperthan AS&S. There was a good discussion on that on here a while back, checkthe archives. If you don't have a West Marinein your area, they will send a free catalog.Carl----- Original Message -----
RE: Pietenpol-List: Re:piano hinges
Original Posted By: "Kent Hallsten"
Hi Bert,22 ga steel is still available. I found some at an Ace hardware about a milefrom work. Got a sheet about 8" X 24" for less than $4.00.Used it on the aileron horn on the tork tube, came out nice and real strong.Skip>I'm doing my aileron horns this weekend. The piet plans call for 22 ga>steel. >I've put a few new pictures on my recently resurrected (and still under>construction) website. I've got a few pictures of my wing construction as>well as the Boredom Fighter Larry Harrison has completed - it uses a Chevy>engine , too.http://bconoly.tripod.com/Great website!________________________________________________________________________________Subject: RE: Pietenpol-List: Re:piano hingesDate: Mon, 23 Sep 2002 08:13:23 -0500
Hi Bert,22 ga steel is still available. I found some at an Ace hardware about a milefrom work. Got a sheet about 8" X 24" for less than $4.00.Used it on the aileron horn on the tork tube, came out nice and real strong.Skip>I'm doing my aileron horns this weekend. The piet plans call for 22 ga>steel. >I've put a few new pictures on my recently resurrected (and still under>construction) website. I've got a few pictures of my wing construction as>well as the Boredom Fighter Larry Harrison has completed - it uses a Chevy>engine , too.http://bconoly.tripod.com/Great website!________________________________________________________________________________Subject: RE: Pietenpol-List: Re:piano hingesDate: Mon, 23 Sep 2002 08:13:23 -0500