Original Posted By: "Gary McNeel"
I will be placing my order for some lasercut parts for my GN-1 Friday.Because of the way the cut list is working on my order, I will be gettingsome extra parts that I will not need. These parts are laser cut from .080"4140 and also bent where applicable.I will have them available for a cheap price to those interested.Parts will be:3 extra sets - tail wheel steering horn left and right (bolts to both sidesof rudder) $20 per set.1 extra set - elevator horns left and right $201 extra set - walking beam support brackets left and right $15If there are any parts any of you GN-1 builders need let me know. I will beable to add it to my cut list. The more parts I have cut the lower the costper part is..... so... rudder horns, aileron horns, brace lugs, etc...let me know and I'll draw them up and put them in with my order.... you canpretty much plan on about $15 per part... so let me know ASAP!DJ VeghN74DVwww.raptoronline.comMesa, AZThis email has been scanned for known viruses and made safe for viewing by Half Price Hosting, a leading email and web hosting provider. For more information on an anti-virus email solution, visit .________________________________________________________________________________