Original Posted By: "Jack Phillips"
List,What thickness of aluminum would be the best to cov er the gap between center sectionand wing? I have some .010 or .012 but seems like it might be a tad flimsy.Thanks.DickG.________________________________________________________________________________
Pietenpol-List: Fairings
RE: Pietenpol-List: Fairings
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Hi Dick,I used .016" 2024-T3 and it seems about right. That was what my Cessna 140used in this application. I bought a length of the stuff AS&S sells forleading edge material.Jack -----Original Message-----
Hi Dick,I used .016" 2024-T3 and it seems about right. That was what my Cessna 140used in this application. I bought a length of the stuff AS&S sells forleading edge material.Jack -----Original Message-----
Re: Pietenpol-List: Fairings
Original Posted By: "Jack Phillips"
----- Original Message -----
----- Original Message -----