Original Posted By: Les Schubert
Just to add one more data point to the growing pile, the wing lift struts on NX41CC are right at 30 degrees from horizontal, and I believe the wing cabanes are lengthened a bit to raise the wing. But I looked at the geometry in CAD and tried moving the wing back down to stock location and it only reduces the angle a degree or two. Twenty degrees wouldn't seem to be correct in any case that I looked at.Oscar ZunigaSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________Date: Thu, 27 Jan 2005 07:54:24 -0700