Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"
Pietenpol-List: room temp bending of Lexan
RE: Pietenpol-List: room temp bending of Lexan
Original Posted By: "Jack T. Textor"
Subject: Re: Pietenpol-List: Lexan bendingI bent my windshields cold in a homemade brake. I used 3/16 material. The other two piets on the field did theirs the same way. Seems to work fine. Mine have ben on the plane since 1995 with no cracking or crazing. Jim________________________________________________________________________________Subject: RE: Pietenpol-List: room temp bending of LexanDate: Thu, 30 Nov 2006 15:14:03 -0600
Subject: Re: Pietenpol-List: Lexan bendingI bent my windshields cold in a homemade brake. I used 3/16 material. The other two piets on the field did theirs the same way. Seems to work fine. Mine have ben on the plane since 1995 with no cracking or crazing. Jim________________________________________________________________________________Subject: RE: Pietenpol-List: room temp bending of LexanDate: Thu, 30 Nov 2006 15:14:03 -0600