Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"
I'll let Corky reply on his experience with the Hegy 72x42 prop on 41CC since he flew the airplane with a metal prop before he had the Hegy on it, but so far my experience with it has been very good. In climbout at 50MPH with this prop, the engine turns 2250RPM. The prop is nice.Not sure what Corky paid for it, but probably $500-$600. Again, I'll let him chime in here.Oscar ZunigaSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net_________________________________________________________________Laugh, share and connect with Windows Live Messenger ________________________________________________________________________________Subject: Pietenpol-List: Hegy Prop 41CCDate: Wed, 31 Jan 2007 11:29:56 -0600
Pietenpol-List: Hegy Prop 41CC
Re: Pietenpol-List: Hegy prop
Original Posted By:
Subject: Re: Pietenpol-List: Hegy propOscar, you are doing a good job about the prop. Hegy 72X42 as recommended by most. Made from birch. I'll try and find address as he has moved to Colorado from Marfa, Tx. The second prop I bought from him is laminated maple and walnut for 311CC which I sold as a project Tim Willis in Georgetown, Tx. Pd $580w/freight.Corky________________________________________________________________________________
Subject: Re: Pietenpol-List: Hegy propOscar, you are doing a good job about the prop. Hegy 72X42 as recommended by most. Made from birch. I'll try and find address as he has moved to Colorado from Marfa, Tx. The second prop I bought from him is laminated maple and walnut for 311CC which I sold as a project Tim Willis in Georgetown, Tx. Pd $580w/freight.Corky________________________________________________________________________________