Pietenpol-List: flying to Brodhead is like having a baby

matronics · Post by **matronics** » Thu Nov 29, 2007 3:09 pm

Original Posted By: "Phillips, Jack"

matronics · Post by **matronics** » Thu Nov 29, 2007 3:59 pm

Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"

matronics · Post by **matronics** » Thu Nov 29, 2007 8:30 pm

Original Posted By: "Rick Holland"

matronics · Post by **matronics** » Thu Nov 29, 2007 8:58 pm

Original Posted By: RBush96589(at)aol.com
Hi RobertI just did that in August. First it is most important to make sure that the wings are even, measured to the tail. I used the trailing edge at the point that the ailereons start and measured to the base of the vert stab. Make sure that your cabane cross wires are good and tight.I bought a digital level that measures down to the tenth of a degree. I leveled up the fuse and adjusted the struts so the wing tips are 1/2 degree higher than inboard measurement..good luckDick N. ----- Original Message -----

matronics · Post by **matronics** » Fri Nov 30, 2007 6:26 am

Original Posted By: "Phillips, Jack"

matronics · Post by **matronics** » Fri Nov 30, 2007 2:39 pm

Original Posted By: "Phillips, Jack"

matronics · Post by **matronics** » Fri Apr 28, 2017 9:32 pm

Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"
>>There are two radio choices that fit in a small instrument hole (2 3/8"?).>These are the Microaire, and the Becker. I have the Becker in my Aeronca >and it> works well. It takes only 5 amps I believe.>>Dan Helsper>Poplar Grove, IL.>>>**************************************Check out AOL's list of 2007's >hottest>products.>(http://money.aol.com/special/hot-produc ... 0000000001)Kenneth M. Heide, BA, CPO, FAAOP ---------------------------------Get easy, one-click access to your favorites. Make Yahoo! your homepage.________________________________________________________________________________Subject: Pietenpol-List: flying to Brodhead is like having a babyDate: Thu, 29 Nov 2007 14:09:38 -0600

Brodhead Pietenpol Association