Original Posted By:>
Subject: Pietenpol-List: Brodhead & OshThanks Skip!That's great, we can get to Osh and stake out a campsite, backtrack to Brodhead and back to Osh. We're looking for volunteering opportunities this year at Osh if anybody knows of any? Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, detailsIn a message dated 5/21/2008 12:07:31 P.M. Central Daylight Time, skipgadd(at)earthlink.net writes:--> Pietenpol-List message posted by: "Skip Gadd" Hey Chrissi,July 23, 24, and 25.See you there.Skip> [Original Message]
Pietenpol-List: Brodhead & Osh
RE: Pietenpol-List: Brodhead & Osh
Original Posted By:>
Wow - the Cozy girrrls at Broadhead? Maybe making Piet parts???I've stalled on my Cozy due to rising cost of living and lowering of the wallet.I've been thinking about a Piet since it's relatively affordable (in a dazedsort of way).I can't make either Briadhead or Osh but it's great to have such a dynamic duointo the Piet world! I have the Piet plans as well as the plans to a Gerard GN1that someone actually sent me. They decided not to use them and just mailedthem.Good luck!Bob HasselSanta Fe, NMThanks Skip!That's great, we can get to Osh and stake out a campsite, backtrack to Brodhead and back to Osh. We're looking for volunteering opportunities this year at Osh if anybody knows of any? Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, detailsIn a message dated 5/21/2008 12:07:31 P.M. Central Daylight Time, skipgadd(at)earthlink.net writes:--> Pietenpol-List message posted by: "Skip Gadd" Hey Chrissi,July 23, 24, and 25.See you there.Skip> [Original Message]
Wow - the Cozy girrrls at Broadhead? Maybe making Piet parts???I've stalled on my Cozy due to rising cost of living and lowering of the wallet.I've been thinking about a Piet since it's relatively affordable (in a dazedsort of way).I can't make either Briadhead or Osh but it's great to have such a dynamic duointo the Piet world! I have the Piet plans as well as the plans to a Gerard GN1that someone actually sent me. They decided not to use them and just mailedthem.Good luck!Bob HasselSanta Fe, NMThanks Skip!That's great, we can get to Osh and stake out a campsite, backtrack to Brodhead and back to Osh. We're looking for volunteering opportunities this year at Osh if anybody knows of any? Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, detailsIn a message dated 5/21/2008 12:07:31 P.M. Central Daylight Time, skipgadd(at)earthlink.net writes:--> Pietenpol-List message posted by: "Skip Gadd" Hey Chrissi,July 23, 24, and 25.See you there.Skip> [Original Message]
Re: Pietenpol-List: Brodhead & Osh
Original Posted By: Dog67(at)aol.com
Subject: Re: Pietenpol-List: Brodhead & OshEEEEP... we have been discovered =)Yes Bob, we are very interested in the Piet. Its what I really wanted to build in the first place; a low and slow subsonic bugsmasher but when we werelooking for a plane to build in the Kitplanes plans issue and "C" came before"P" so we bought Cozy Mk-IV plans (hows that for all the wrong reasons?) =)Seeing Dick's article in Sport Aviation was just too much to pass up and meeting him while we were volunteering at SNF made it clear this would be our next project.We have all the plans and printed matter from Pietenpol and hope to pick up more knowledge while we finish the Cozy.CG Products make Piet metal parts? Lets just say we are seriously considering it once we get a feel for the demand. We have nearly all the canardmetal parts in production so its time to look for something new.You probably are on the right track as far as switching to an economical project both in the building and flying.Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, details===================================================Wow - the Cozy girrrls at Broadhead? Maybe making Piet parts???I've stalled on my Cozy due to rising cost of living and lowering of the wallet. I've been thinking about a Piet since it's relatively affordable (ina dazed sort of way).I can't make either Briadhead or Osh but it's great to have such a dynamic duo into the Piet world! I have the Piet plans as well as the plans to a Gerard GN1 that someone actually sent me. They decided not to use them and justmailed them.Good luck!Bob HasselSanta Fe, NM**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Subject: Re: Pietenpol-List: Brodhead & OshEEEEP... we have been discovered =)Yes Bob, we are very interested in the Piet. Its what I really wanted to build in the first place; a low and slow subsonic bugsmasher but when we werelooking for a plane to build in the Kitplanes plans issue and "C" came before"P" so we bought Cozy Mk-IV plans (hows that for all the wrong reasons?) =)Seeing Dick's article in Sport Aviation was just too much to pass up and meeting him while we were volunteering at SNF made it clear this would be our next project.We have all the plans and printed matter from Pietenpol and hope to pick up more knowledge while we finish the Cozy.CG Products make Piet metal parts? Lets just say we are seriously considering it once we get a feel for the demand. We have nearly all the canardmetal parts in production so its time to look for something new.You probably are on the right track as far as switching to an economical project both in the building and flying.Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, details===================================================Wow - the Cozy girrrls at Broadhead? Maybe making Piet parts???I've stalled on my Cozy due to rising cost of living and lowering of the wallet. I've been thinking about a Piet since it's relatively affordable (ina dazed sort of way).I can't make either Briadhead or Osh but it's great to have such a dynamic duo into the Piet world! I have the Piet plans as well as the plans to a Gerard GN1 that someone actually sent me. They decided not to use them and justmailed them.Good luck!Bob HasselSanta Fe, NM**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Re: Pietenpol-List: Brodhead & Osh
Original Posted By: CozyGirrrl(at)aol.com
Subject: Re: Pietenpol-List: Brodhead & OshIf y'all start doing metal parts for Piets - keep me posted, I'd be interestedCheersJon A**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Subject: Re: Pietenpol-List: Brodhead & OshIf y'all start doing metal parts for Piets - keep me posted, I'd be interestedCheersJon A**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Re: Pietenpol-List: Brodhead & Osh
Original Posted By: Oscar Zuniga
Subject: Re: Pietenpol-List: Brodhead & OshIn a message dated 5/21/2008 9:45:00 P.M. Central Daylight Time, Dog67(at)aol.com writes:If y'all start doing metal parts for Piets - keep me posted, I'd be interestedCheersJon A========================Dear Jon,If we do we will make an announcement and it will also be on our parts web site as well.Aside from the plans we are too new to the group and type to know if the hardware is good as it is designed or are there improvements or tweaks that areconsidered improvements.What we did with the Cozy Mk-IV is first make sure we manufactured plans parts made to the plans first. There were several innovative and significantlyimproved ways of doing things but they are best offered as alternative or supplementary parts to the standard ones. Any discussion or feedback from the group would be welcome.Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, details**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________
Subject: Re: Pietenpol-List: Brodhead & OshIn a message dated 5/21/2008 9:45:00 P.M. Central Daylight Time, Dog67(at)aol.com writes:If y'all start doing metal parts for Piets - keep me posted, I'd be interestedCheersJon A========================Dear Jon,If we do we will make an announcement and it will also be on our parts web site as well.Aside from the plans we are too new to the group and type to know if the hardware is good as it is designed or are there improvements or tweaks that areconsidered improvements.What we did with the Cozy Mk-IV is first make sure we manufactured plans parts made to the plans first. There were several innovative and significantlyimproved ways of doing things but they are best offered as alternative or supplementary parts to the standard ones. Any discussion or feedback from the group would be welcome.Regards, Chrissi & RandiCG Products, Custom Aircraft Hardwarewww.CozyGirrrl.com Cozy Mk-IV RG 13B-turboPlans #957 Chapter? big pieces done, details, details**************Get trade secrets for amazing burgers. Watch "Cooking with Tyler Florence" on AOL Food. (http://food.aol.com/tyler-florence?vide ... 0000000002)________________________________________________________________________________