Original Posted By: KMHeide, BA, CPO, FAAOP
Ken, my front passenger will see three things:-A slip indicator-A passenger warning plaque-An old plaque with the light gun signals-He/she will have a stick and rudder pedals. That's it-Jim Lagowski----- Original Message -----
Pietenpol-List: Tach & Parking Brake
Pietenpol-List: Tach & Parking Brake
Original Posted By: "Lagowski Morrow"
Before putting them on e-bay see if "you' can use the following;--New Matco barking brake, original price ~$60--New Mitchell mechanical drive Tach with hour meter, Counter clockwise rotation for 65 Continental, original price $182.95. Includes calibration and invoice.Will take $40 for the parking brake and $120 for the tach. Shipping is freeJim lagowski, NX221PT________________________________________________________________________________
Before putting them on e-bay see if "you' can use the following;--New Matco barking brake, original price ~$60--New Mitchell mechanical drive Tach with hour meter, Counter clockwise rotation for 65 Continental, original price $182.95. Includes calibration and invoice.Will take $40 for the parking brake and $120 for the tach. Shipping is freeJim lagowski, NX221PT________________________________________________________________________________
Re: Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: "Lynn Knoll"
Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpitOn Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================>________________________________________________________________________________
Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpitOn Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================>________________________________________________________________________________
Re: Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: KMHeide, BA, CPO, FAAOP
Ken, my front passenger will see three things:-A slip indicator-A passenger warning plaque-An old plaque with the light gun signalsHe/she will have a stick and rudder pedals. That's itJim Lagowski ----- Original Message -----
Ken, my front passenger will see three things:-A slip indicator-A passenger warning plaque-An old plaque with the light gun signalsHe/she will have a stick and rudder pedals. That's itJim Lagowski ----- Original Message -----
Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: "KMHeide, BA, CPO, FAAOP"
Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: "Rick Holland"
Re: Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: "John Recine"
On Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================>________________________________________________________________________________Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpit
On Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================> _- > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > ======================>________________________________________________________________________________Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpit