Original Posted By: Roman Bukolt
KenAs you collect the pics. Would you mind sharing them. I too am looking for justthe right layoutJohnOr at least a clue to get me in a good directionSent from my Verizon Wireless BlackBerry-----Original Message-----
Pietenpol-List: Gas Tank Filler Neck Seal
Re: Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: shad bell
Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpitOn Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>============0A=0A=0A ________________________________________________________________________________Date: Sun, 29 Jun 2008 21:12:54 -0700 (PDT)
Subject: Re: Pietenpol-List: Instrument panels pilot and front cockpitOn Jun 29, 2008, at 2:07 PM, KMHeide, BA, CPO, FAAOP wrote:>> Fellow Pieters.......> The front instrument panel was a blank, black aluminum panel when I > got this plane. The rear panel was also black aluminum and I added > the Hobbs meter, the old cub type mg switch, ELT tet and cherry wood > veneer.Roman Bukolt NX20795>> I am in the final stages of completing my pilot instrument panel. I > have not decided what to install in the front cockpit as of yet.>>> I am interested in seeing photos of your instrument panels both > front and rear to see some various layouts. I am sure many others > would love to see the photos as it give many ideas and suggestions > as to what is in these planes and where certain locations of gauges > are positioned.>>> Kenneth M. Heide, BA, CPO, FAAOP>>> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > = > 3D > =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>============0A=0A=0A ________________________________________________________________________________Date: Sun, 29 Jun 2008 21:12:54 -0700 (PDT)
Pietenpol-List: Gas Tank Filler Neck Seal
Original Posted By: "KMHeide, BA, CPO, FAAOP"
I need a source for the seal around the filler neck on the front fusledge tank. Lynn KnollWichitaPiet/Vair________________________________________________________________________________Date: Sun, 29 Jun 2008 20:57:46 -0700 (PDT)
I need a source for the seal around the filler neck on the front fusledge tank. Lynn KnollWichitaPiet/Vair________________________________________________________________________________Date: Sun, 29 Jun 2008 20:57:46 -0700 (PDT)
Re: Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: KMHeide, BA, CPO, FAAOP
Ken,Here is the pilot's panel on NX18235. Nothing but the passenger warning in the front panel.Greg Cardinal ----- Original Message -----
Ken,Here is the pilot's panel on NX18235. Nothing but the passenger warning in the front panel.Greg Cardinal ----- Original Message -----
Pietenpol-List: Instrument panels pilot and front cockpit
Original Posted By: shad bell
Re: Pietenpol-List: Gas Tank Filler Neck Seal
Original Posted By: Lynn Knoll
I think mine is a J3 part. You might be able to find one from Univair.http://www.univairparts.com/Steve RuseNorman, OK ----- Original Message -----
I think mine is a J3 part. You might be able to find one from Univair.http://www.univairparts.com/Steve RuseNorman, OK ----- Original Message -----