Pietenpol-List: Yellow Piet at Lee Bottom Flying Field

matronics · Post by **matronics** » Thu Oct 02, 2008 10:42 pm

Original Posted By: "Cuy, Michael D. (GRC-RXD0)[ASRC]"
Thanks Bill and Jack for the response. I think I will go with 8-32 washer headscrews. I did think of only partially counter sinking the flat head screws, butthey would probably wind up being as high above the hinge as the washer headscrew.Rick Schreiber________________________________________________________________________________Subject: Pietenpol-List: Yellow Piet at Lee Bottom Flying FieldDate: Fri, 3 Oct 2008 06:51:33 -0500

matronics · Post by **matronics** » Fri Oct 03, 2008 9:41 am

Original Posted By: shad bell

matronics · Post by **matronics** » Fri Oct 03, 2008 9:58 am

Original Posted By: "Phillips, Jack"

matronics · Post by **matronics** » Sun Oct 05, 2008 1:35 pm

Original Posted By: "Rick Holland"

matronics · Post by **matronics** » Sun Oct 05, 2008 2:50 pm

Original Posted By:
Rick; there was nothing in your email. Inquiring minds want to hear your updateon latex paint; thanks.Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net________________________________________________________________________________

Brodhead Pietenpol Association

Pietenpol-List: Yellow Piet at Lee Bottom Flying Field

Pietenpol-List: Yellow Piet at Lee Bottom Flying Field

RE: Pietenpol-List: Aileron Hinge, counter sinking

RE: Pietenpol-List: Aileron Hinge, counter sinking

Pietenpol-List: Latex paint status report