Original Posted By: Darrel Jones
I've got a line on some KZ400 wheels - they're 18" but only 1.6" rim with a 5 1/2" hub. Would need to replace the bearings but my question is are the rims too narrow? The tires are 3" wide... This is for a front rim. The rears have the integral brake drum built into the hub - I'm considering this too for use of the brakes - I like the drum brakes being simple cable operated. I think the rears are 1.85" wide. Opinions or experience?Also - my Hoopman plans didn't include any gear plans except the cub style - are the Jenny style plans available seperately? I could probably go from photos and other peoples dimensions / descriptions=2C but plans would be nice if they're available.Thanks=2CTom BrantBrooklyn Park=2C MN80% fuselage=2C tail=2C ribs done=2C 40% Corvair engine - Buying spar material in another two weeks - yeah!________________________________________________________________________________Date: Wed, 05 Aug 2009 18:37:49 -0700
Pietenpol-List: KZ400 wheels and plans for Jenny style gear
Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
Original Posted By: "skybachs"
[quote="tmbrant(at)msn.com"] Also - my Hoopman plans didn't include any gear plans except the cub style - arethe Jenny style plans available seperately? I could probably go from photosand other peoples dimensions / descriptions C but plans would be nice if they'reavailable.Thanks CTom BrantBrooklyn Park C MN80% fuselage C tail C ribs done C 40% Corvair engine - Buying spar material inanother two weeks - yeah!> Tom; I believe the wood/straight axel gear plans are available from the Pietenpolfamily; these are also detailed in the '32 Flying and Glider manual.WillRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
[quote="tmbrant(at)msn.com"] Also - my Hoopman plans didn't include any gear plans except the cub style - arethe Jenny style plans available seperately? I could probably go from photosand other peoples dimensions / descriptions C but plans would be nice if they'reavailable.Thanks CTom BrantBrooklyn Park C MN80% fuselage C tail C ribs done C 40% Corvair engine - Buying spar material inanother two weeks - yeah!> Tom; I believe the wood/straight axel gear plans are available from the Pietenpolfamily; these are also detailed in the '32 Flying and Glider manual.WillRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
Original Posted By: TOM MICHELLE BRANT
What's the axle size?I've got some Yamaha 90 wheels that would be terrific, but the axle is only 1/2".Much too wimpy for MY landings
--------NX29NX, C65, Hegy prop, Blue/Cream flying!NX31TM, C85-12, GN-1, 90% done, Red/CreamNX30NX, Corvair, on gear, wings/tail doneNX31NX, Hatz CB-1, O-320B, on gear, ribs doneRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
What's the axle size?I've got some Yamaha 90 wheels that would be terrific, but the axle is only 1/2".Much too wimpy for MY landings
--------NX29NX, C65, Hegy prop, Blue/Cream flying!NX31TM, C85-12, GN-1, 90% done, Red/CreamNX30NX, Corvair, on gear, wings/tail doneNX31NX, Hatz CB-1, O-320B, on gear, ribs doneRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________> Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
Original Posted By:> skybachs(at)yahoo.com
axle size is 17 MM (5/8") but if you press out the bearings=2C it could be larger. Another thing to consider is the gauge of the spokes - the KZ400 spokes are pretty heavy.> Subject: Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
axle size is 17 MM (5/8") but if you press out the bearings=2C it could be larger. Another thing to consider is the gauge of the spokes - the KZ400 spokes are pretty heavy.> Subject: Pietenpol-List: Re: KZ400 wheels and plans for Jenny style gear
Re: Pietenpol-List: Bleriot at Brodhead!!!!
Original Posted By: Ryan Mueller
> To: pietenpol-list(at)matronics.com> > > What's the axle size?> > I've got some Yamaha 90 wheels that would be terrific=2C but the axle is only 1/2". Much too wimpy for MY landings> > --------> NX29NX=2C C65=2C Hegy prop=2C Blue/Cream flying!> NX31TM=2C C85-12=2C GN-1=2C 90% done=2C Red/Cream> NX30NX=2C Corvair=2C on gear=2C wings/tail done> NX31NX=2C Hatz CB-1=2C O-320B=2C on gear=2C ribs done> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 286#256286> > > > > > > ============================================> > > ________________________________________________________________________________Date: Wed, 5 Aug 2009 23:46:31 -0500Subject: Re: Pietenpol-List: Bleriot at Brodhead!!!!
> To: pietenpol-list(at)matronics.com> > > What's the axle size?> > I've got some Yamaha 90 wheels that would be terrific=2C but the axle is only 1/2". Much too wimpy for MY landings
> > --------> NX29NX=2C C65=2C Hegy prop=2C Blue/Cream flying!> NX31TM=2C C85-12=2C GN-1=2C 90% done=2C Red/Cream> NX30NX=2C Corvair=2C on gear=2C wings/tail done> NX31NX=2C Hatz CB-1=2C O-320B=2C on gear=2C ribs done> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 286#256286> > > > > > > ============================================> > > ________________________________________________________________________________Date: Wed, 5 Aug 2009 23:46:31 -0500Subject: Re: Pietenpol-List: Bleriot at Brodhead!!!!