Original Posted By: Robert Ray
Subject: Re: Pietenpol-List: go/ no go tool--- a must when using Nicopresstools
Re: Pietenpol-List: go/ no go tool--- a must when using Nicopresstools
> > Re: Pietenpol-List: go/ no go tool--- a must when using
Original Posted By: shad bell
Re: Bell's carb heat muff, was Re: Pietenpol-List: Nicopress tools
Original Posted By: Michael Perez
RE: Pietenpol-List: Fuselage wedges on sides
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Depends entirely on how hard you land. Under normal conditions, the wedgesare probably not necessary at all. If you can guarentee you will never makea really hard landing, don't put them in.Understand that a lot of this airplane (like most airplanes) is"overdesigned" for normal circumstances. Frankly, I want an airplane thatcan handle extraordianry circumstances and not fail. It's your choice.Jack PhillipsNX899JPRaleigh, NC _____
Depends entirely on how hard you land. Under normal conditions, the wedgesare probably not necessary at all. If you can guarentee you will never makea really hard landing, don't put them in.Understand that a lot of this airplane (like most airplanes) is"overdesigned" for normal circumstances. Frankly, I want an airplane thatcan handle extraordianry circumstances and not fail. It's your choice.Jack PhillipsNX899JPRaleigh, NC _____