Original Posted By: Robert Ray
Can any members of the list send me photos of the offset vertical fin? I am searching for a photos-in guidence to making my vertical fin offset and the brackets!=0A-=0APlease email me directly...=0A-=0Akmheide=0A=0A=0A-=0A=0A=0A=0A=0A=0A=0A=0A ________________________________________________________________________________Date: Wed, 16 Sep 2009 04:10:24 -0400Subject: Re: Pietenpol-List: Re: Mechanical Heel Brakes
Pietenpol-List: Mechanical Heel Brakes
Pietenpol-List: Mechanical Heel Brakes
Original Posted By: "Gary Boothe"
I've been trying, without success, to locate photographs, drawing, sketches, detailed descriptions, etc., of how to configure/rig/ install mechanical heel brakes. i'd appreciate some resource leads. Many thanks, Dick Carden________________________________________________________________________________
I've been trying, without success, to locate photographs, drawing, sketches, detailed descriptions, etc., of how to configure/rig/ install mechanical heel brakes. i'd appreciate some resource leads. Many thanks, Dick Carden________________________________________________________________________________
RE: Pietenpol-List: Mechanical Heel Brakes
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Richard,Here's a couple pictures of how I did mine...not flight tested. Contact meoff list if you want more detail...Gary BootheCool, Ca.PietenpolWW Corvair Conversion, mountedTail done, Fuselage on gear(15 ribs down.)-----Original Message-----
Richard,Here's a couple pictures of how I did mine...not flight tested. Contact meoff list if you want more detail...Gary BootheCool, Ca.PietenpolWW Corvair Conversion, mountedTail done, Fuselage on gear(15 ribs down.)-----Original Message-----
Original Posted By: "Skip Gadd"
This is about as simple as it gets. http://westcoastpiet.com/images/G-BUCO% ... -----Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs all doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
This is about as simple as it gets. http://westcoastpiet.com/images/G-BUCO% ... -----Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs all doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: Re: Mechanical Heel Brakes
Original Posted By: "Jerry Dotson"
________________________________________________________________________________Subject: Pietenpol-List: Re: Mechanical Heel Brakes
________________________________________________________________________________Subject: Pietenpol-List: Re: Mechanical Heel Brakes