Original Posted By: owner-pietenpol-list-server(at)matronics.com [mailto:owner-pietenpol-lis
Michael,=C2-I don=99t have that info at my fingertips, but consider that you may want to thread the ends for the Aurora bearings. Pick an appropriate ID and wall thickness based on the bearings you choose.=C2-Gary BootheCool, Ca.PietenpolWW Corvair Conversion, mountedTail done,=C2-Fuselage=C2-on gear(15 ribs down)
Pietenpol-List: Push/pull linkage size/type
Pietenpol-List: Push/pull linkage size/type
Original Posted By: Michael.D.Cuy(at)nasa.gov
RE: Pietenpol-List: Push/pull linkage size/type
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Michael,I don't have that info at my fingertips, but consider that you may want tothread the ends for the Aurora bearings. Pick an appropriate ID and wallthickness based on the bearings you choose.Gary BootheCool, Ca.PietenpolWW Corvair Conversion, mountedTail done, Fuselage on gear(15 ribs down.) _____
Michael,I don't have that info at my fingertips, but consider that you may want tothread the ends for the Aurora bearings. Pick an appropriate ID and wallthickness based on the bearings you choose.Gary BootheCool, Ca.PietenpolWW Corvair Conversion, mountedTail done, Fuselage on gear(15 ribs down.) _____