Original Posted By: Ben Charvet
Pietenpol-List: What size prop
Re: Pietenpol-List: What size prop
Original Posted By: Jeff Boatright
Re: Pietenpol-List: What size prop
Original Posted By: jeff wilson
Jeff,NX18235 is flying with a 72 X 42 prop. Climb rate is 500+ fpm when the airplane is light but falls to 200 fpm at heavier weights.At 2050 rpm in level flight I am seeing about 72 - 75 mph. At 2150 rpm I am seeing 78 - 82 mph.Greg Cardinal ----- Original Message -----
Jeff,NX18235 is flying with a 72 X 42 prop. Climb rate is 500+ fpm when the airplane is light but falls to 200 fpm at heavier weights.At 2050 rpm in level flight I am seeing about 72 - 75 mph. At 2150 rpm I am seeing 78 - 82 mph.Greg Cardinal ----- Original Message -----
Re: Pietenpol-List: What size prop
Original Posted By: Ryan Mueller
Subject: Re: Pietenpol-List: What size prop
Subject: Re: Pietenpol-List: What size prop
Pietenpol-List: Re: What size prop
Original Posted By: "Douwe Blumberg"
Re:I'll second that. He and Carmen were pleasant to deal with...I'm sure the propwill be top-notch....I'll let you know in two days when FedEx delivers it!SmileRyanI have a prop ordered from Jay also. How about posting a hi-res picture when youget it (Pleeeeze).--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re:I'll second that. He and Carmen were pleasant to deal with...I'm sure the propwill be top-notch....I'll let you know in two days when FedEx delivers it!SmileRyanI have a prop ordered from Jay also. How about posting a hi-res picture when youget it (Pleeeeze).--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Original Posted By: Oscar Zuniga
Hey Jack, I was just pulling your chain.As I wrote in my posting, I'm actually jealous. I wish my workspace was so tidy.A clean workspace is MUCH easier to work in. Keep doing what you're doing. MaybeI should just try to clean up my act a bit.My workshop is out in the garage, so there's no dust working it's way into thehouse (except what I carry in on my clothes, so I do try to eliminate that beforecoming back in).Now, if I could only find that dog...BCRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Hey Jack, I was just pulling your chain.As I wrote in my posting, I'm actually jealous. I wish my workspace was so tidy.A clean workspace is MUCH easier to work in. Keep doing what you're doing. MaybeI should just try to clean up my act a bit.My workshop is out in the garage, so there's no dust working it's way into thehouse (except what I carry in on my clothes, so I do try to eliminate that beforecoming back in).Now, if I could only find that dog...BCRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: Re: Fuselage Update
Original Posted By: "Bill Church"
Nice work Jack!________________________________________________________________________________Subject: Pietenpol-List: Re: Fuselage Update
Nice work Jack!________________________________________________________________________________Subject: Pietenpol-List: Re: Fuselage Update
Pietenpol-List: What size prop
Original Posted By: Dan Yocum
Jeff:When I had the A65 on NX41CC it flew behind aHegy 72x42 wood prop. I think many/most Pietswith the A65 use something like that.By the way, the Hegy may be for sale if anyoneis interested. $500.Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net ________________________________________________________________________________Date: Tue, 23 Mar 2010 08:53:59 -0500
Jeff:When I had the A65 on NX41CC it flew behind aHegy 72x42 wood prop. I think many/most Pietswith the A65 use something like that.By the way, the Hegy may be for sale if anyoneis interested. $500.Oscar ZunigaAir Camper NX41CCSan Antonio, TXmailto: taildrags(at)hotmail.comwebsite at http://www.flysquirrel.net ________________________________________________________________________________Date: Tue, 23 Mar 2010 08:53:59 -0500
Re: Pietenpol-List: What size prop
Original Posted By: Jeff Boatright
Re: Pietenpol-List: What size prop
Original Posted By: Mike King
Pietenpol-List: Re: What size prop
Original Posted By: "Jack"
A mahogany and maple scimitar prop for my Lycoming O-235 last December was $820.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
A mahogany and maple scimitar prop for my Lycoming O-235 last December was $820.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: Re: What size prop
Original Posted By: "Jerry Dotson"
Gene what did he put on the leading edge for protection? I can't ell in the photo.Just wondering. Boy that thing is purty.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: What size prop
Gene what did he put on the leading edge for protection? I can't ell in the photo.Just wondering. Boy that thing is purty.--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: What size prop
Original Posted By: jeff wilson
Jay AndersonCLOUDCARS325-356-2810cloudcars(AT)verizon.netThat is what I have in my address book--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 24 Mar 2010 05:50:59 -0700 (PDT)
Jay AndersonCLOUDCARS325-356-2810cloudcars(AT)verizon.netThat is what I have in my address book--------Jerry Dotson59 Daniel Johnson RdBaker, FL 32531Started building NX510JD July, 2009Ribs and tailfeathers doneusing Lycoming O-235Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 24 Mar 2010 05:50:59 -0700 (PDT)