Pietenpol-List: Pin Nailer

[matronics]

Original Posted By: "Kringle"
Rob Bach is but he's fighting a bent exhaust valve on the blue Piet. Wish I could...-- yocum(at)gmail.comOn Jul 1, 2010, at 6:33 AM, Jack wrote:> Anyone planning to attend?> > Jack> > DSM> > >> > ________________________________________________________________________________Subject: Pietenpol-List: Pin Nailer

[matronics]

Original Posted By: Ben Charvet
Has anyone used a pin nailer to hold their rib gussets in place? I played withmine last night and it seems to me it would be good way to go. The pins are1/2 inch long and 23 gauge. That's a smaller gauge than the nails (20 gauge).I would prefer a shorter length but this is the shortest my Porter- Cablepin nailer will handle.--------JohnRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Thu, 01 Jul 2010 08:35:35 -0400

[matronics]

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Should work fine. The nails are only there to hold the gusset in place (andunder the correct clamping pressure if using Resorcinol glue) under the gluecures. After that they can be removed, if desired.Jack PhillipsNX899JPRaleigh, NC-----Original Message-----

[matronics]

Original Posted By: Rick Holland
Subject: Re: Pietenpol-List: Pin Nailer

[matronics]

Original Posted By: shad bell

[matronics]

Original Posted By: Rick Holland
Subject: Re: Pietenpol-List: Re: Pin Nailer