Original Posted By: Dan Yocum
Let me also say that when I get to the point of building the fin area I will be adding something like a balsa half round to the LE of the rudder to help close the gap and get rid of that flat surface which undoubtably helps to deflect more air through the gap. If you go this route make sure to leave enough room to get the hinge pins in. -- yocum(at)gmail.com> ________________________________________________________________________________Subject: Re: Pietenpol-List: Antique Airfield, 4th annual Homebuilt Fly-in, IA27,July 2nd and 3rd
Re: Pietenpol-List: Antique Airfield, 4th annual Homebuilt Fly-in, IA27,
Re: Pietenpol-List: Antique Airfield, 4th annual Homebuilt Fly-in, IA27,
Original Posted By: Jack
Antique Airfield, 4th annual Homebuilt Fly-in, IA27, July 2nd and 3rdI'm going, but taking the RV-3 instead of the Piet.Perry RhoadsN12939 ----- Original Message -----
Antique Airfield, 4th annual Homebuilt Fly-in, IA27, July 2nd and 3rdI'm going, but taking the RV-3 instead of the Piet.Perry RhoadsN12939 ----- Original Message -----