Original Posted By: "dwilson"
Nice job Mike, I'm saving the photo for future reference.Kip GardnerOn Aug 1, 2010, at 10:33 AM, Bill Church wrote:> >> Mike wrote:> "The ring gear is up front and is a standard WW part along with the > starter he recommends (with his nose gear).">> Personally I think that nose gear on a Pietenpol would look > horrible. Keep it as a taildragger...>> Seriously, though, it looks like you guys "nailed it" in designing > your Piet/Corvair cowling.> Really nice.>> Bill C>>> Read this topic online here:>> http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Gerald Thornhill Prop Carving Presentation Oshkosh
Pietenpol-List: Gerald Thornhill Prop Carving Presentation Oshkosh
Re: Pietenpol-List: Gerald Thornhill Prop Carving Presentation Oshkosh
Original Posted By: helspersew(at)aol.com
Subject: Re: Pietenpol-List: Gerald Thornhill Prop Carving Presentation OshkoshI would be interested in seeing the spread sheet if anyone can provide it or point me it the direction to get it for myself.ThanksJohnIn a message dated 8/1/2010 2:38:28 P.M. Eastern Daylight Time, marwilson(at)charter.net writes:--> Pietenpol-List message posted by: "dwilson" Greetings! If you attended the prop carving presentation by Jerry Thornhill at Oshkosh and wanted to create your own prop please feel free to usethis spreadsheet to perform the calculations. The results match the handoutsthat he provided at Oshkosh. The notes on the page are my own from his presentation. Let me know if you need additional information. Anyone have a picture of Jerry's prop they could post ?dwilsonRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: Gerald Thornhill Prop Carving Presentation OshkoshDate: Sun, 01 Aug 2010 21:18:23 -0400
Subject: Re: Pietenpol-List: Gerald Thornhill Prop Carving Presentation OshkoshI would be interested in seeing the spread sheet if anyone can provide it or point me it the direction to get it for myself.ThanksJohnIn a message dated 8/1/2010 2:38:28 P.M. Eastern Daylight Time, marwilson(at)charter.net writes:--> Pietenpol-List message posted by: "dwilson" Greetings! If you attended the prop carving presentation by Jerry Thornhill at Oshkosh and wanted to create your own prop please feel free to usethis spreadsheet to perform the calculations. The results match the handoutsthat he provided at Oshkosh. The notes on the page are my own from his presentation. Let me know if you need additional information. Anyone have a picture of Jerry's prop they could post ?dwilsonRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Re: Pietenpol-List: Gerald Thornhill Prop Carving Presentation OshkoshDate: Sun, 01 Aug 2010 21:18:23 -0400
Pietenpol-List: Re: Gerald Thornhill Prop Carving Presentation Oshkosh
Original Posted By: "Billy McCaskill"
As we are going to be ordering our plans any day now. I see that product 7 is forthe wooden landing gear. What landing gear is in the original plans? Is itnot wooden?Of course it is only $20, but I'm just curious of what is going on there.Also should I get the original build manual?I guess I should just get the whole thing for $250 hu?Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Gerald Thornhill Prop Carving Presentation Oshkosh
As we are going to be ordering our plans any day now. I see that product 7 is forthe wooden landing gear. What landing gear is in the original plans? Is itnot wooden?Of course it is only $20, but I'm just curious of what is going on there.Also should I get the original build manual?I guess I should just get the whole thing for $250 hu?Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Gerald Thornhill Prop Carving Presentation Oshkosh
Original Posted By: Ben Charvet
dwilson,I would be interested in this spreadsheet. My email address is billmz (at) cox(dot)net. Thanks!--------Billy McCaskillUrbana, ILtailfeathers almost doneRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 02 Aug 2010 06:04:04 -0400
dwilson,I would be interested in this spreadsheet. My email address is billmz (at) cox(dot)net. Thanks!--------Billy McCaskillUrbana, ILtailfeathers almost doneRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 02 Aug 2010 06:04:04 -0400