Pietenpol-List: Re: Tig welder question

matronics · Post by **matronics** » Wed Nov 17, 2010 8:06 pm

Original Posted By: "Clayton Harper"
I think anyone in the landing gear process would do well to read the recent articleby William Wynn in the latest Broadhead Pietenpol Assoc. newsletter.This year at Broadhead WW began gathering data on weight and balance and gear locationson a variety of Piets. His first article on this subject appears inthe current newsletter and he has some good thoughts on landing gear placement.After having read what he has to say I will be checking out my gear placementon the GN-1 before covering the fuselage.--------Jon Coxwell GN-1 BuilderRecycle and preserve the planetRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Tig welder question

matronics · Post by **matronics** » Thu Nov 18, 2010 8:25 am

Original Posted By: Clayton Harper
Subject: Re: Pietenpol-List: Re: Tig welder questionI have done that with my setup however 032 material is easily transformed to transparent aluminium. Which is where the pedal really comes im handy John Sent via DROID on Verizon Wireless-----Original message-----

matronics · Post by **matronics** » Thu Nov 18, 2010 8:50 am

Original Posted By: Jim Markle

matronics · Post by **matronics** » Thu Nov 18, 2010 1:25 pm

Original Posted By: AMsafetyC(at)aol.com
Subject: Re: Pietenpol-List: Tig welder questionI'm in town right now!In a message dated 11/17/2010 5:01:43 P.M. Eastern Standard Time, jim_markle(at)mindspring.com writes:--> Pietenpol-List message posted by: Jim Markle Hey John,Google the model number of your welder and "diy"....if someone has done it, Google will find it!I googled "water cooler" for my TIG machine and came up with a lot of good, inexpensive ideas....Then I did the mandatory "weld two aluminum cans together"....worked well, remind me to show you next time you're in town.Or just bring your stuff over and use my machine...jm-----Original Message-----