Original Posted By: Kimball Isaac
Pietenpol-List: Arrow Fest and New Video
Re: Pietenpol-List: Re: Thanks for the encouragement
Original Posted By: Kimball Isaac
But who wants to pay $270 per gallon of paint? ----- Original Message -----
But who wants to pay $270 per gallon of paint? ----- Original Message -----
Pietenpol-List: Re: Thanks for the encouragement
Original Posted By: "Dangerous Dave"
Kip; that is true enough, yes. The one thing I will point out about the Continentalvs. Corvair is the cost of parts. There is a very large difference betweenthe engines when it comes to obtaining and paying for repair and replacementparts for these engines. And with that, I believe I'll end my contributionsto the thread!--------Oscar ZunigaSan Antonio, TXAir Camper NX41CCRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Thanks for the encouragement
Kip; that is true enough, yes. The one thing I will point out about the Continentalvs. Corvair is the cost of parts. There is a very large difference betweenthe engines when it comes to obtaining and paying for repair and replacementparts for these engines. And with that, I believe I'll end my contributionsto the thread!--------Oscar ZunigaSan Antonio, TXAir Camper NX41CCRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Thanks for the encouragement
Original Posted By: shad bell
I paid $270 a gallon for 3 gallons 155 a gallon for 2 gallons of Ecofill and enoughmore for the whole Stewart system.I am glad I did.another couple of grandis no problem considering I will have over 24,000 in the plane and every partis certified FAA-PMA and done according to the book 43.13 that is.I would liketo put a couple thousand hours on it and not have to wonder if it will lastor if the paint will degenerate.Dave--------Covering PietRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 22 Dec 2010 11:22:45 -0800 (PST)
I paid $270 a gallon for 3 gallons 155 a gallon for 2 gallons of Ecofill and enoughmore for the whole Stewart system.I am glad I did.another couple of grandis no problem considering I will have over 24,000 in the plane and every partis certified FAA-PMA and done according to the book 43.13 that is.I would liketo put a couple thousand hours on it and not have to wonder if it will lastor if the paint will degenerate.Dave--------Covering PietRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Wed, 22 Dec 2010 11:22:45 -0800 (PST)
Pietenpol-List: Re: Hipec covering, rib stitching
Original Posted By: "Charles Campbell"
One word: Rib-stitch.It's not that difficult.If you're building a Jungster1, Jungster2 or Cavilier I defer to others.Just my opinion.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
One word: Rib-stitch.It's not that difficult.If you're building a Jungster1, Jungster2 or Cavilier I defer to others.Just my opinion.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re: Pietenpol-List: Re: small Continental flat-four engines
Original Posted By: "taildrags"
Apparently, some people don't care about costs!----- Original Message -----
Apparently, some people don't care about costs!----- Original Message -----
Pietenpol-List: Re: covering around fuse fittings?
Original Posted By: "Catdesigns"
How did most of you guys cover around the lift struts and motor mount fittingson the fuselage?I seen some are covered up and some look like they are blocked out around the fittings.......notsure which way to go. doe anyone have closeup pictures of those ares they would like to share?ChrisRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: covering around fuse fittings?
How did most of you guys cover around the lift struts and motor mount fittingson the fuselage?I seen some are covered up and some look like they are blocked out around the fittings.......notsure which way to go. doe anyone have closeup pictures of those ares they would like to share?ChrisRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: covering around fuse fittings?