Pietenpol-List: Pietenpol safety

matronics · Post by **matronics** » Sat Mar 02, 2013 9:03 am

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Rick,You bring up an excellent point! On the side of every Pietenpol should be agraphic similar to the attached!! I'm afraid the same thing could happen tome...Gary BootheNX308MB-----Original Message-----

matronics · Post by **matronics** » Sat Mar 02, 2013 9:34 am

Original Posted By: Rick Schreiber

matronics · Post by **matronics** » Sat Mar 02, 2013 10:11 am

Original Posted By: "kevinpurtee"
I found the hole on the floor of the front seat up next to the firewall very helpful.Was able to sit underneath the airplane and get my hands on both sidesof the firewall with minimal trouble.I will do the same thing on the rebuild.Same function as Rick's, just a different location.--------Kevin "Axel" PurteeRebuilding NX899KPAustin/San Marcos, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: tie downs for fly-ins...

matronics · Post by **matronics** » Sat Mar 02, 2013 10:14 am

Original Posted By: "Chris"
What Jack said.--------Kevin "Axel" PurteeRebuilding NX899KPAustin/San Marcos, TXRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

matronics · Post by **matronics** » Sat Mar 02, 2013 11:36 am

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Sent you a PMChrisSacramento, CaWestcoastpiet.com _____

matronics · Post by **matronics** » Sat Mar 02, 2013 11:40 am

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Kevin Good idea. Never thought about accessing the fuel tank after the plane isfinished.ChrisSacramento, CaWestcoastpiet.com-----Original Message-----

matronics · Post by **matronics** » Sat Mar 02, 2013 11:46 am

Original Posted By: Gerry Holland
I have never been to Brodhead, but I attended the west coast gathering 2 summersago when I was working in California temporarily. They are a fantastic bunchof folks and you will make some great friends. For those friends of mine, I have parts cut out for 15 ribs so far and waitingon a delivery of T88 to get started. The cadets in Civil air patrol are wantingto get the chance to help assemble a few pieces.KellyRead this topic online here:http://forums.matronics.com/viewtopic.p ... __________

matronics · Post by **matronics** » Sat Mar 02, 2013 12:05 pm

Original Posted By: "echobravo4"
Can anyone in UK with sprung landing struts (Bernard originally and later writtenup by William Wynne) tell whether LAA Modification needed or exists?RegardsGerry in Somerset.________________________________________________________________________________Subject: Pietenpol-List: Re: motivation

matronics · Post by **matronics** » Sat Mar 02, 2013 3:45 pm

Original Posted By: "Jack Phillips"
Hello All-This list has been a great help for info and motivation to me over the past fewyears- so, since i was updating my build photos today- thought i would post acouple-maybe help some others with some motivation!here is the address to the albums on Picasa if anyone wants to take a look at thewhole story so far!https://picasaweb.google.com/1050589306 ... ------Earl BrownI may not have gone where I intended to go, but I think I have ended up where Iintended to be.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/3_95 ... __________

matronics · Post by **matronics** » Sat Mar 02, 2013 4:25 pm

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Gorgeous work, Earl! I don't think mine was ever that clean.Jack PhillipsNX899JPSmith Mountain Lake, Virginia-----Original Message-----

matronics · Post by **matronics** » Sat Mar 02, 2013 4:47 pm

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Nice, Earl! Be sure to send something to www.westcoastpiet.com.Gary BootheNX308MB-----Original Message-----

matronics · Post by **matronics** » Sat Mar 02, 2013 5:12 pm

Original Posted By: "taildrags"
http://www.youtube.com/watch?v=wTo-wWbJMSU.Gary BootheNX308MB________________________________________________________________________________Subject: Pietenpol-List: Re: Once around the patch

matronics · Post by **matronics** » Sat Mar 02, 2013 5:48 pm

Original Posted By: Ken Bickers
...and that, friends, is why we build these airplanes! Very nice, very nice. I love those windscreens and wood cabane struts.--------Oscar ZunigaMedford, ORAir Camper NX41CC "Scout"A75 powerRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Sat, 2 Mar 2013 16:53:18 -0700Subject: Re: Pietenpol-List: Once around the patch

matronics · Post by **matronics** » Sun Mar 03, 2013 9:34 am

Original Posted By: owner-pietenpol-list-server(at)matronics.com
"...homemade thin chisels made from hacksaw blades..."??Gary BootheNX308MB-----Original Message-----

matronics · Post by **matronics** » Sun Mar 03, 2013 9:44 am

Original Posted By: "Gary Boothe"
http://americanlongrifles.org/forum/ind ... 7856.0Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________

matronics · Post by **matronics** » Sun Mar 03, 2013 9:55 am

Original Posted By: owner-pietenpol-list-server(at)matronics.com
Interesting....thanks!Gary BootheNX308MB-----Original Message-----

Brodhead Pietenpol Association

Pietenpol-List: Pietenpol safety

Pietenpol-List: Pietenpol safety

Re: Pietenpol-List: Re: carb heat muff

Pietenpol-List: Re: tie downs for fly-ins...

RE: Pietenpol-List: FW: Your my guinea pig and you didn't even know it.

RE: Pietenpol-List: Re: carb heat muff

Pietenpol-List: Re: newbie question

Pietenpol-List: Re: motivation

RE: Pietenpol-List: Re: motivation

RE: Pietenpol-List: Re: motivation

Pietenpol-List: Re: Once around the patch

Re: Pietenpol-List: Once around the patch

RE: Pietenpol-List: Pietenpol safety

Pietenpol-List: Re: Pietenpol safety

RE: Pietenpol-List: Re: Pietenpol safety