Pietenpol-List: Need email

matronics · Post by **matronics** » Thu Sep 12, 2013 1:19 pm

Original Posted By: "Perry Rhoads"
Anybody know Ernie Moreno's email?Dan HelsperPuryear, TN________________________________________________________________________________

matronics · Post by **matronics** » Thu Sep 12, 2013 1:55 pm

Original Posted By: danhelsper(at)aol.com
here ya go:ewmoreno(at)minefiber.com ----- Original Message -----

matronics · Post by **matronics** » Sat Sep 14, 2013 3:38 pm

Original Posted By: macz(at)peak.org
Subject: Re: Pietenpol-List: Need email

matronics · Post by **matronics** » Tue Oct 08, 2013 12:24 pm

Original Posted By: Ken Bickers
Can someone give me Malcolm Morrison's email address? Thanks.Dan HelsperPuryear, TN________________________________________________________________________________Date: Tue, 8 Oct 2013 11:32:07 -0600Subject: Re: Pietenpol-List: Need email

matronics · Post by **matronics** » Fri Apr 28, 2017 9:38 pm

Original Posted By: danhelsper(at)aol.com
> To: pietenpol-list(at)matronics.com> > > If you need to change the position of your wing - and almost EVERYONE needs to - in order to correct your cg location=2C you need to use your "B" method. > > Hopefully=2C you can visualize the parallelogram that "B" provides=2C which will allow for the cabane struts to be moved fore and back.> > With the sketch shown in "A=2C" what happens is that the front and rear cabanes will be locked into a fixed relationship. What they need is to be free to act as hinges in the front / rear swing directions.> > Follow the plans...> > --------> Tom Kreiner> > > > > Read this topic online here:> > http://forums.matronics.com/viewtopic.p ... 045#410045> > > > > > > ============================================> > > ________________________________________________________________________________Subject: Pietenpol-List: Need email