Original Posted By: "Jack Phillips"
I wanted to eat a little crow here. I made a snide remark about the list whilereplying to another question. it seems I had asked nearly the same questiona few days earlier and although 70 or so folks read my question no one answered. I admire all these builders here and im gonna need some help on thisjourney I don't want to be considered un-gratefull. Please accept my apologyI don't want to be a bad egg.Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Pietenpol-List: apology
RE: Pietenpol-List: apology
Original Posted By: owner-pietenpol-list-server(at)matronics.com
Apology accepted. There's a lot of good info available here, but as RyanMueller commented, many of the questions being raised have been answeredmany times over the last 16 years, and people get tired of answering themagain, when the questions and answers are available in the archives.And most of the questions can be abswered by just reading Tony Bingelis'books and actually thinking about the problem and coming up with a solution,instead of immediately asking someone else how they solved the problem. Tobe honest, most of the fun I had bulding my Pietenpol was coming up withsolutions to these problems.Jack PhillipsNX899JPSmith Mountain Lake, Virginia-----Original Message-----
Apology accepted. There's a lot of good info available here, but as RyanMueller commented, many of the questions being raised have been answeredmany times over the last 16 years, and people get tired of answering themagain, when the questions and answers are available in the archives.And most of the questions can be abswered by just reading Tony Bingelis'books and actually thinking about the problem and coming up with a solution,instead of immediately asking someone else how they solved the problem. Tobe honest, most of the fun I had bulding my Pietenpol was coming up withsolutions to these problems.Jack PhillipsNX899JPSmith Mountain Lake, Virginia-----Original Message-----
Re: Pietenpol-List: apology
Original Posted By: Steven Dortch
I hate to waste anything ...a tree even ifs its only a spruce had to give itslife for that to make that rib :-)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 23 Dec 2013 11:01:18 -0600Subject: Re: Pietenpol-List: apology
I hate to waste anything ...a tree even ifs its only a spruce had to give itslife for that to make that rib :-)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 23 Dec 2013 11:01:18 -0600Subject: Re: Pietenpol-List: apology
Re: Pietenpol-List: apology
Original Posted By: Steven Dortch
Subject: Re: Pietenpol-List: apology
Subject: Re: Pietenpol-List: apology
>> Pietenpol-List: apology
Original Posted By: Michael Perez
Re: Pietenpol-List: apology
Original Posted By: Michael Perez