Original Posted By: "GNflyer"
I used two zippers in a V-shape to provide access on the bottom. Its easy, lightand inexpensive. I can also get my upper body up in the fuselage to look around.I did this with Poly-Fiber system and now with Latex paint and all seemsgood. Wish I could claim the idea, but it came from Don Wolf and the BoredomFighter design.Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: West systems
Pietenpol-List: West systems
Original Posted By:
Well I received my prop today from Cloudcars. and talked to Jay some on his tipsfor doing the finish work.he was very helpful and says I should lay a fiberglasscloth on the backside from station 21 out with west system epoxy. I knowsome on here have used it but I have not. I did find dealers in the DFW areaand probably will be down there next week. it seems pretty pricey and I probablyonly need a small amount. but anyway if anybody can give me any tips on a goodplace around there that might sell or maybe a boat shop I might get a littlefrom instead of the quart kit for over 60 bucks I'd be glad to hear it. Iknow it must be very good quality- maybe it soaks in better than other brands?he will send me some pictures in a few weeks of one he is finishing up for someoneso I can better see the process but I figured I'd better get some materialsgathered up when I can- nothing like that brand available in the Texas panhandleas far as I know- at least not their dealers. RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Sat, 18 Jan 2014 8:46:42 -0500
Well I received my prop today from Cloudcars. and talked to Jay some on his tipsfor doing the finish work.he was very helpful and says I should lay a fiberglasscloth on the backside from station 21 out with west system epoxy. I knowsome on here have used it but I have not. I did find dealers in the DFW areaand probably will be down there next week. it seems pretty pricey and I probablyonly need a small amount. but anyway if anybody can give me any tips on a goodplace around there that might sell or maybe a boat shop I might get a littlefrom instead of the quart kit for over 60 bucks I'd be glad to hear it. Iknow it must be very good quality- maybe it soaks in better than other brands?he will send me some pictures in a few weeks of one he is finishing up for someoneso I can better see the process but I figured I'd better get some materialsgathered up when I can- nothing like that brand available in the Texas panhandleas far as I know- at least not their dealers. RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Sat, 18 Jan 2014 8:46:42 -0500
Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Original Posted By: "AircamperN11MS"
Just for you Tools, as requested. Here is my plane with the B1 Bomber at Edwards AFB.. Between 1993 and 1995, I don'tremember anymore. It was taken at about 7 am before the other 100 or so homebuiltsand public showed up. The armed guards were very nice about it. It isamazing how well Pieters are treated. Do any of you have similar photos? With other special aircraft. I myself wouldlike to see them.--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/img_ ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Just for you Tools, as requested. Here is my plane with the B1 Bomber at Edwards AFB.. Between 1993 and 1995, I don'tremember anymore. It was taken at about 7 am before the other 100 or so homebuiltsand public showed up. The armed guards were very nice about it. It isamazing how well Pieters are treated. Do any of you have similar photos? With other special aircraft. I myself wouldlike to see them.--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/img_ ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Pietenpol-List: Re: West systems
Original Posted By: "GNflyer"
Correction, B2 Bomber.--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: West systems
Correction, B2 Bomber.--------Scott LiefeldFlying N11MS since March 1972Steel TubeC-85-12Wire WheelsBrodhead in 1996Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: West systems
Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Original Posted By: "tools"
thanks- that looks like a good alternative. I think if I don't locate a dealerthat has it in stock next week I'll order that 101T kit. I'd think it likely wouldhave all the product I would need. RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
thanks- that looks like a good alternative. I think if I don't locate a dealerthat has it in stock next week I'll order that 101T kit. I'd think it likely wouldhave all the product I would need. RaymondRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Original Posted By: "jarheadpilot82"
Scott,That is SO cool! Thanks!Here's my dad's then newly completed Hatz and my (for the day, a cross countryflight with a student into Dicky Goober for the weekend) TA-4J.Probably 1998 or so...I wanted to get a pic of them inflight one way or another, but dad wasn't too keenon the idea!ToolsRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Scott,That is SO cool! Thanks!Here's my dad's then newly completed Hatz and my (for the day, a cross countryflight with a student into Dicky Goober for the weekend) TA-4J.Probably 1998 or so...I wanted to get a pic of them inflight one way or another, but dad wasn't too keenon the idea!ToolsRead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: Scott Liefelds Piet and B1 Bomber
Original Posted By: "Gary Boothe"
Tools,No picture or link to a picture.Good thing your nickname isn't "computers". [Wink]--------Semper Fi,Terry HandAthens, GARead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Tools,No picture or link to a picture.Good thing your nickname isn't "computers". [Wink]--------Semper Fi,Terry HandAthens, GARead this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re: Pietenpol-List: It could be worse...
Original Posted By: Ken Bickers
The drought out here in The West is pretty bad.but it does have an up-side!http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be Gary BootheNX308MB________________________________________________________________________________Date: Sat, 18 Jan 2014 19:53:43 -0700Subject: Re: Pietenpol-List: It could be worse...
The drought out here in The West is pretty bad.but it does have an up-side!http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be Gary BootheNX308MB________________________________________________________________________________Date: Sat, 18 Jan 2014 19:53:43 -0700Subject: Re: Pietenpol-List: It could be worse...
Re: Pietenpol-List: It could be worse...
Original Posted By: Gary Boothe
Thanks Gary where are you flying? makes me homesick for Nevada.Sent from my iPhone> On Jan 18, 2014, at 6:34 PM, "Gary Boothe" wrote:> > The drought out here in The West is pretty badbut it does have an up-side! http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be> > Gary Boothe> NX308MB> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Subject: Re: Pietenpol-List: It could be worse...
Thanks Gary where are you flying? makes me homesick for Nevada.Sent from my iPhone> On Jan 18, 2014, at 6:34 PM, "Gary Boothe" wrote:> > The drought out here in The West is pretty badbut it does have an up-side! http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be> > Gary Boothe> NX308MB> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________Subject: Re: Pietenpol-List: It could be worse...
Original Posted By: Ray Krause
Lincoln, Ca. Just NE of Sacramento.Sent from my iPhone> On Jan 18, 2014, at 7:23 PM, glenschweizer(at)yahoo.com wrote:> > Thanks Gary where are you flying? makes me homesick for Nevada.> > Sent from my iPhone> >> On Jan 18, 2014, at 6:34 PM, "Gary Boothe" wrote:>> >> The drought out here in The West is pretty badbut it does have an up-side! http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be>> >> Gary Boothe>> NX308MB>> >> >> >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> npol-List"">http://www.matronics.com/Navigator?Pietenpol-List>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> //forums.matronics.com>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> ot;">http://www.matronics.com/contribution>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________
Lincoln, Ca. Just NE of Sacramento.Sent from my iPhone> On Jan 18, 2014, at 7:23 PM, glenschweizer(at)yahoo.com wrote:> > Thanks Gary where are you flying? makes me homesick for Nevada.> > Sent from my iPhone> >> On Jan 18, 2014, at 6:34 PM, "Gary Boothe" wrote:>> >> The drought out here in The West is pretty badbut it does have an up-side! http://www.youtube.com/watch?v=5pFAzSHD ... e=youtu.be>> >> Gary Boothe>> NX308MB>> >> >> >> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> npol-List"">http://www.matronics.com/Navigator?Pietenpol-List>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> //forums.matronics.com>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> ot;">http://www.matronics.com/contribution>> D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D>> > > 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> ________________________________________________________________________________