Original Posted By: "Boatright, Jeffrey"
Pieters,Last spring I wrote this group that I was beginning to build some sets of wing ribs. Many events have prevented my completing this project. I've tried to make a few but I'm experiencing frustration and impatience which results in inferior workmanship. Not that I think I'm a craftsman but I would not like to leave some products less than I would like. So, the purpose of this letter is to offer some poor Piet builder my inventory of materials I purchased for this project.6 pcs Douglas.Fir from Puget Sound Area, 6ftx6 in kiln dried, close vertical grain, no pitch pockets. The very finest I could acquire. 2 4x8 sheets boat plywood for gussets and. 1 sheet of plywood for 1/8purpose.T 88 And nails from Wicks. 42.77Lumber and plywood from Eden-saw. 408.80 451.57 No more no less. FOB Shreveport, LaAbout half the lumber has been milled down to 1/4x3/8 x 5 ft for caps tripA few gussets cutout. Anyone interested please contact me direct on internet or 318 455 7435I guarantee a real bargainSent my iPad________________________________________________________________________________
Pietenpol-List: Material for wing ribs
Pietenpol-List: Material for wing ribs
Original Posted By: Claude Corbett
Would the Pieter from Tennessee please resend I his message, I accidentally destroyed,it.The wood is not spruce but high quality Douglas 'Fir. Also. I failed to mentionthere is enough material to build 3 sets of wings. The rib jig is also complete.________________________________________________________________________________Subject: Pietenpol-List: Material for wing ribs
Would the Pieter from Tennessee please resend I his message, I accidentally destroyed,it.The wood is not spruce but high quality Douglas 'Fir. Also. I failed to mentionthere is enough material to build 3 sets of wings. The rib jig is also complete.________________________________________________________________________________Subject: Pietenpol-List: Material for wing ribs
Original Posted By: Claude Corbett
Pieters,Last spring I wrote this group that I was beginning to build some sets of wing ribs. Many events have prevented my completing this project. I've tried to make a few but I'm experiencing frustration and impatience which results in inferior workmanship. Not that I think I'm a craftsman but I would not like to leave some products less than I would like. So, the purpose of this letter is to offer some poor Piet builder my inventory of materials I purchased for this project.6 pcs Douglas.Fir from Puget Sound Area, 6ftx6 in kiln dried, close vertical grain, no pitch pockets. The very finest I could acquire. 2 4x8 sheets boat plywood for gussets and. 1 sheet of plywood for 1/8purpose.T 88 And nails from Wicks. 42.77Lumber and plywood from Eden-saw. 408.80 451.57 No more no less. FOB Shreveport, LaAbout half the lumber has been milled down to 1/4x3/8 x 5 ft for caps tripA few gussets cutout. Anyone interested please contact me direct on internet or 318 455 7435I guarantee a real bargainWould the person from Tenn please resend your message? I accidentally trashed it.SentOomy iPad________________________________________________________________________________
Pieters,Last spring I wrote this group that I was beginning to build some sets of wing ribs. Many events have prevented my completing this project. I've tried to make a few but I'm experiencing frustration and impatience which results in inferior workmanship. Not that I think I'm a craftsman but I would not like to leave some products less than I would like. So, the purpose of this letter is to offer some poor Piet builder my inventory of materials I purchased for this project.6 pcs Douglas.Fir from Puget Sound Area, 6ftx6 in kiln dried, close vertical grain, no pitch pockets. The very finest I could acquire. 2 4x8 sheets boat plywood for gussets and. 1 sheet of plywood for 1/8purpose.T 88 And nails from Wicks. 42.77Lumber and plywood from Eden-saw. 408.80 451.57 No more no less. FOB Shreveport, LaAbout half the lumber has been milled down to 1/4x3/8 x 5 ft for caps tripA few gussets cutout. Anyone interested please contact me direct on internet or 318 455 7435I guarantee a real bargainWould the person from Tenn please resend your message? I accidentally trashed it.SentOomy iPad________________________________________________________________________________