Original Posted By: "jarheadpilot82"
Now that I have opened up Model A engine and had a good look I am ready toget someone to do the machine work. I have asked the Model A folks inthis area and I have been advised that no one local can do the mods Ineed.Aside from the plans mods which include drilling the crank for pressureoiling, I'd like to get the oversize valves, insert bearings and perhaps a"cruising" cam. I plan the aluminum 6.5:1 head as well. Can anyone recommend an engine builder? There are several on the web thatshould be capable.BobRobert Gow,President and DAO Manager.Avionics Design Services Ltd.Phn 705-527-6095Cell 416-434-3393Fax 705-527-6028www.avionicsdesign.ca________________________________________________________________________________Subject: Pietenpol-List: Re: it's been a good run but..........
Pietenpol-List: Re: it's been a good run but..........
Pietenpol-List: Re: it's been a good run but..........
Original Posted By: "tools"
Jim, I have to admit I did not know what that was so I looked it up. See below.We all should use that filter at certain times. Good point on your part.--------Semper Fi,Terry HandAthens, GAUSMC, USMCR, ATPBVD DVD PDQ BBQRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/imag ... ___Subject: Pietenpol-List: Re: it's been a good run but..........
Jim, I have to admit I did not know what that was so I looked it up. See below.We all should use that filter at certain times. Good point on your part.--------Semper Fi,Terry HandAthens, GAUSMC, USMCR, ATPBVD DVD PDQ BBQRead this topic online here:http://forums.matronics.com/viewtopic.p ... ttachments: http://forums.matronics.com//files/imag ... ___Subject: Pietenpol-List: Re: it's been a good run but..........
Original Posted By: "Boatright, Jeffrey"
Is Larry selling the plane too?Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Is Larry selling the plane too?Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________
Re: Pietenpol-List: Re: it's been a good run but..........
Original Posted By: jim hyde
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________________________________________________________________________________Date: Mon, 18 Aug 2014 12:15:20 -0700
V2hhdCwgeW91IG1lYW4gbm93IHRoYXQgaGXigJlzIGdvdCBpdCBnb2luZyBmYXN0KGVyKT8NCg0KSG9wZWZ1bGx5IGhl4oCZbGwgc3RpbGwga2VlcCB1cCB3aXRoIHRoZSBCUEEgbmV3c2xldHRlciwgZXRjLCBhbmQgd2XigJlsbCBzZWUgaGltIGF0IEJyb2RoZWFkLg0KDQotLQ0KDQpGcm9tOiB0b29scyA8bjBra2pAeWFob28uY29tPG1haWx0bzpuMGtrakB5YWhvby5jb20+Pg0KUmVwbHktVG86ICJwaWV0ZW5wb2wtbGlzdEBtYXRyb25pY3MuY29tPG1haWx0bzpwaWV0ZW5wb2wtbGlzdEBtYXRyb25pY3MuY29tPiIgPHBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb208bWFpbHRvOnBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb20+Pg0KRGF0ZTogTW9uZGF5LCBBdWd1c3QgMTgsIDIwMTQgYXQgMTowMSBQTQ0KVG86ICJwaWV0ZW5wb2wtbGlzdEBtYXRyb25pY3MuY29tPG1haWx0bzpwaWV0ZW5wb2wtbGlzdEBtYXRyb25pY3MuY29tPiIgPHBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb208bWFpbHRvOnBpZXRlbnBvbC1saXN0QG1hdHJvbmljcy5jb20+Pg0KU3ViamVjdDogUGlldGVucG9sLUxpc3Q6IFJlOiBpdCdzIGJlZW4gYSBnb29kIHJ1biBidXQuLi4uLi4uLi4uDQoNCi0tPiBQaWV0ZW5wb2wtTGlzdCBtZXNzYWdlIHBvc3RlZCBieTogInRvb2xzIiA8bjBra2pAeWFob28uY29tPG1haWx0bzpuMGtrakB5YWhvby5jb20+Pg0KDQpJcyBMYXJyeSBzZWxsaW5nIHRoZSBwbGFuZSB0b28/DQoNCg0KDQoNClJlYWQgdGhpcyB0b3BpYyBvbmxpbmUgaGVyZToNCg0KaHR0cDovL2ZvcnVtcy5tYXRyb25pY3MuY29tL3ZpZXd0b3BpYy5waHA/cD00Mjg2NzMjNDI4NjczDQoNCg0KDQoNCg0KDQoNCl8tPT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09DQpfLT0gICAgICAgICAgLSBUaGUgUGlldGVucG9sLUxpc3QgRW1haWwgRm9ydW0gLQ0KXy09IFVzZSB0aGUgTWF0cm9uaWNzIExpc3QgRmVhdHVyZXMgTmF2aWdhdG9yIHRvIGJyb3dzZQ0KXy09IHRoZSBtYW55IExpc3QgdXRpbGl0aWVzIHN1Y2ggYXMgTGlzdCBVbi9TdWJzY3JpcHRpb24sDQpfLT0gQXJjaGl2ZSBTZWFyY2ggJiBEb3dubG9hZCwgNy1EYXkgQnJvd3NlLCBDaGF0LCBGQVEsDQpfLT0gUGhvdG9zaGFyZSwgYW5kIG11Y2ggbXVjaCBtb3JlOg0KXy09DQpfLT0gICAtLT4gaHR0cDovL3d3dy5tYXRyb25pY3MuY29tL05hdmlnYXRvcj9QaWV0ZW5wb2wtTGlzdA0KXy09DQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAgICAgICAgLSBNQVRST05JQ1MgV0VCIEZPUlVNUyAtDQpfLT0gU2FtZSBncmVhdCBjb250ZW50IGFsc28gYXZhaWxhYmxlIHZpYSB0aGUgV2ViIEZvcnVtcyENCl8tPQ0KXy09ICAgLS0+IGh0dHA6Ly9mb3J1bXMubWF0cm9uaWNzLmNvbQ0KXy09DQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KXy09ICAgICAgICAgICAgIC0gTGlzdCBDb250cmlidXRpb24gV2ViIFNpdGUgLQ0KXy09ICBUaGFuayB5b3UgZm9yIHlvdXIgZ2VuZXJvdXMgc3VwcG9ydCENCl8tPSAgICAgICAgICAgICAgICAgICAgICAgICAgICAgIC1NYXR0IERyYWxsZSwgTGlzdCBBZG1pbi4NCl8tPSAgIC0tPiBodHRwOi8vd3d3Lm1hdHJvbmljcy5jb20vY29udHJpYnV0aW9uDQpfLT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PT09PQ0KDQoNCg0KDQoNCl9fX19fX19fX19fX19fX19fX19fX19fX19fX19fX19fDQoNClRoaXMgZS1tYWlsIG1lc3NhZ2UgKGluY2x1ZGluZyBhbnkgYXR0YWNobWVudHMpIGlzIGZvciB0aGUgc29sZSB1c2Ugb2YNCnRoZSBpbnRlbmRlZCByZWNpcGllbnQocykgYW5kIG1heSBjb250YWluIGNvbmZpZGVudGlhbCBhbmQgcHJpdmlsZWdlZA0KaW5mb3JtYXRpb24uIElmIHRoZSByZWFkZXIgb2YgdGhpcyBtZXNzYWdlIGlzIG5vdCB0aGUgaW50ZW5kZWQNCnJlY2lwaWVudCwgeW91IGFyZSBoZXJlYnkgbm90aWZpZWQgdGhhdCBhbnkgZGlzc2VtaW5hdGlvbiwgZGlzdHJpYnV0aW9uDQpvciBjb3B5aW5nIG9mIHRoaXMgbWVzc2FnZSAoaW5jbHVkaW5nIGFueSBhdHRhY2htZW50cykgaXMgc3RyaWN0bHkNCnByb2hpYml0ZWQuDQoNCklmIHlvdSBoYXZlIHJlY2VpdmVkIHRoaXMgbWVzc2FnZSBpbiBlcnJvciwgcGxlYXNlIGNvbnRhY3QNCnRoZSBzZW5kZXIgYnkgcmVwbHkgZS1tYWlsIG1lc3NhZ2UgYW5kIGRlc3Ryb3kgYWxsIGNvcGllcyBvZiB0aGUNCm9yaWdpbmFsIG1lc3NhZ2UgKGluY2x1ZGluZyBhdHRhY2htZW50cykuDQo________________________________________________________________________________Date: Mon, 18 Aug 2014 12:15:20 -0700
Pietenpol-List: Re: it's been a good run but..........
Original Posted By: "dfwplt"
Sometimes when someone wants to give advice and they deliver it in a manner thatthey are right and superior and everyone else is beneath them, it's a littletough to take. Many folks tend to read the character of a person and accept advicewhen it is delivered in a much more diplomatic manner. To chase away guyslike Larry Williams is really too bad for this group. If you are building,please exercise discernment in who you listen to for advice. It only makes senseto listen to guys who have built and have been flying safely for years. Oftenyou'll find they are the ones that are not telling you how right and howsuperior they are.Don EmchNX899DERead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: it's been a good run but..........
Sometimes when someone wants to give advice and they deliver it in a manner thatthey are right and superior and everyone else is beneath them, it's a littletough to take. Many folks tend to read the character of a person and accept advicewhen it is delivered in a much more diplomatic manner. To chase away guyslike Larry Williams is really too bad for this group. If you are building,please exercise discernment in who you listen to for advice. It only makes senseto listen to guys who have built and have been flying safely for years. Oftenyou'll find they are the ones that are not telling you how right and howsuperior they are.Don EmchNX899DERead this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: it's been a good run but..........
Original Posted By: George Abernathy
Good points Don. I'm also concerned that some of us are clouding up VERY valuableinformation with not so subtle personal character and moral innuendoes. Wheredid all that come from? And I'm NOT just referring to William Wynne's statements.This is a much larger issue than any one person. Up until recentlynames never WERE mentioned but technical pointers were very clear. And thankgoodness!I rebuilt my lift struts because someone mentioned how welding aluminum destroyedthe strength of aluminum. I didn't need my name mentioned to get the point!!!NO ONE on this list is so stupid that they need to be mentioned by name toapply valuable content! We're ALL anxious to do that! That's a big part ofwhy we're here. We're also here because this is a very special group of people.And I can tell you more than one builder I've passed "suggestions" to inthis public forum but you will NOT be able to figure out who it was. That's NOTimportant!And all this "you have a delete key" crap? Enough already! How about we PERSONALLYapply a delete key to some of our typing BEFORE we hit the send button?TAKE SOME RESPONSIBILITY TO BE A POSITIVE CONTRIBUTOR TO THIS FORUM!!! Don'tlet the fact that I have a delete key remove YOUR responsibility to participatein this forum like a gentleman and stay focused on building in the spirit ofthis wonderful old Pietenpol design.Some of these messages simply communicate a misleading message. Let's start puttinga bit more brain power into WHY we're typing that message and WHAT it reallycommunicates before we hit the send button. Then we won't ever have tomake that silly "you have a delete key" statement. Think about this: When you type a message, read it back and think how it wouldsound if you were standing on a table in the pavilion at Brodhead....would yousay something like that in front of all those people you barely know but respectso much?Come on folks, in this type of forum there's no stopping vulgar language or "subtle"character attacks, but really, where is it getting us? Take that stuffto some other forum, this place is special. If life has burdened you and todayisn't a good day, take some time off from the list!Oh, and I admittedly don't have ANY experience flying a Pietenpol and I've madeEVERY single mistake possible on my project. And I have NO more right to pontificatethan anyone. But I just HAVE to believe we can each refocus a bit andget this thing back on a MUCH more positive track. Let's get back to the pointwhere we don't EVEN have these conversations about people leaving and ourfocus makes more people want to JOIN the list! And believe me, this isn't justabout Larry Williams...many other important voices are now silent and shouldNOT be! Let's move beyond THAT debate and move forward!Let's take a look at the general attitude around here and stop focusing on individuals.Please, let's move on folks!Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 18 Aug 2014 15:37:58 -0700
Good points Don. I'm also concerned that some of us are clouding up VERY valuableinformation with not so subtle personal character and moral innuendoes. Wheredid all that come from? And I'm NOT just referring to William Wynne's statements.This is a much larger issue than any one person. Up until recentlynames never WERE mentioned but technical pointers were very clear. And thankgoodness!I rebuilt my lift struts because someone mentioned how welding aluminum destroyedthe strength of aluminum. I didn't need my name mentioned to get the point!!!NO ONE on this list is so stupid that they need to be mentioned by name toapply valuable content! We're ALL anxious to do that! That's a big part ofwhy we're here. We're also here because this is a very special group of people.And I can tell you more than one builder I've passed "suggestions" to inthis public forum but you will NOT be able to figure out who it was. That's NOTimportant!And all this "you have a delete key" crap? Enough already! How about we PERSONALLYapply a delete key to some of our typing BEFORE we hit the send button?TAKE SOME RESPONSIBILITY TO BE A POSITIVE CONTRIBUTOR TO THIS FORUM!!! Don'tlet the fact that I have a delete key remove YOUR responsibility to participatein this forum like a gentleman and stay focused on building in the spirit ofthis wonderful old Pietenpol design.Some of these messages simply communicate a misleading message. Let's start puttinga bit more brain power into WHY we're typing that message and WHAT it reallycommunicates before we hit the send button. Then we won't ever have tomake that silly "you have a delete key" statement. Think about this: When you type a message, read it back and think how it wouldsound if you were standing on a table in the pavilion at Brodhead....would yousay something like that in front of all those people you barely know but respectso much?Come on folks, in this type of forum there's no stopping vulgar language or "subtle"character attacks, but really, where is it getting us? Take that stuffto some other forum, this place is special. If life has burdened you and todayisn't a good day, take some time off from the list!Oh, and I admittedly don't have ANY experience flying a Pietenpol and I've madeEVERY single mistake possible on my project. And I have NO more right to pontificatethan anyone. But I just HAVE to believe we can each refocus a bit andget this thing back on a MUCH more positive track. Let's get back to the pointwhere we don't EVEN have these conversations about people leaving and ourfocus makes more people want to JOIN the list! And believe me, this isn't justabout Larry Williams...many other important voices are now silent and shouldNOT be! Let's move beyond THAT debate and move forward!Let's take a look at the general attitude around here and stop focusing on individuals.Please, let's move on folks!Read this topic online here:http://forums.matronics.com/viewtopic.p ... ______Date: Mon, 18 Aug 2014 15:37:58 -0700
Pietenpol-List: Re: it's been a good run but..........
Original Posted By: "Don Emch"
nday, August 18, 2014 at 12:45 PM=0ATo: "pietenpol-list(at)matronics.com" =0ASubject: Pietenpol-List: Re: dunning kruger efeadpilot82(at)hotmail.com> =0A>=0A> =0A>Jim, =0A>I have to admit I did not know what that was so I looked it up. See below. =0A>=0A> =0A>We all should use that filter at certain times. Good point on your part. =0A>=0A> =0A>-------- =0A>Semper Fi, =0A>=0A> =0A>Terry Hand =0A>Athens, GA =0A>=0A> =0A>USMC, USMCR, ATP =0A>BVD DVD PDQ BBQ =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A>Read this topic online here: =0A>=0A> =0A>http://forums.matronics.com/viewtopic.p ... 669#428669 =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A>Attachments: =0A>=0A> =0A>http://forums.matronics.com//files/image_149.jpg =0A>=0A>==C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-- The Pieten=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-================= =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A=0A=0A________________________________=0A =0AThis e-mail message (including any attachments) is for the sole use of=0Athe intended recipient(s) and may contain confidential and privileged=0Ainformation. If the reader of this message is not the intended=0Arecipient, you are hereby notified that any dissemination, distribution=0Aor copying of this message (including any attachments) is strictly=0Aprohibited.=0A=0AIf you have received this message in error, please contact=0Athe sender by reply e-mail message and destroy all copies of the=0Aoriginal message (including attachments).________________________________________________________________________________Subject: Pietenpol-List: Re: it's been a good run but..........
nday, August 18, 2014 at 12:45 PM=0ATo: "pietenpol-list(at)matronics.com" =0ASubject: Pietenpol-List: Re: dunning kruger efeadpilot82(at)hotmail.com> =0A>=0A> =0A>Jim, =0A>I have to admit I did not know what that was so I looked it up. See below. =0A>=0A> =0A>We all should use that filter at certain times. Good point on your part. =0A>=0A> =0A>-------- =0A>Semper Fi, =0A>=0A> =0A>Terry Hand =0A>Athens, GA =0A>=0A> =0A>USMC, USMCR, ATP =0A>BVD DVD PDQ BBQ =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A>Read this topic online here: =0A>=0A> =0A>http://forums.matronics.com/viewtopic.p ... 669#428669 =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A>Attachments: =0A>=0A> =0A>http://forums.matronics.com//files/image_149.jpg =0A>=0A>==C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-- The Pieten=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-=C2-================= =0A>=0A> =0A>=0A> =0A>=0A> =0A>=0A> =0A=0A=0A________________________________=0A =0AThis e-mail message (including any attachments) is for the sole use of=0Athe intended recipient(s) and may contain confidential and privileged=0Ainformation. If the reader of this message is not the intended=0Arecipient, you are hereby notified that any dissemination, distribution=0Aor copying of this message (including any attachments) is strictly=0Aprohibited.=0A=0AIf you have received this message in error, please contact=0Athe sender by reply e-mail message and destroy all copies of the=0Aoriginal message (including attachments).________________________________________________________________________________Subject: Pietenpol-List: Re: it's been a good run but..........
