Pietenpol-List: T-88 in the heat

[matronics]

Original Posted By: "Cuy, Michael D. (GRC-LME0)[Vantage Partners, LLC]"
Glen, I used T-88 for every glue joint in my Pietenpol and I have had it out in the sunon 90, 95, and 97F days and flown it on those days with bumpyturbulence and nothing fell apart due to T-88 softening so I would say ignore anythoughts or worries about using T-88 from that standpoint. Should this be a concern? No. You have bigger fish to fry. Merry Christmas!Mike C.________________________________________________________________________________

[matronics]

Original Posted By: "womenfly2"
Con llll gratula llll tions--------Jake Schultz - curator,Newport Way Air Museum (OK, it's just my home)Read this topic online here:http://forums.matronics.com/viewtopic.p ... ___Subject: Pietenpol-List: Re: T-88 in the heat

[matronics]

Original Posted By: Craig Aho
I have done the FAA "Glue Boil Test" using T-88 .... nothing came apart.An interesting read; From "Construction Notes" Falco Builders Letter." (http://www.seqair.com/skunkworks/Glues/Notes/Notes.html)WF2--------Read this topic online here:http://forums.matronics.com/viewtopic.p ... __________

[matronics]

Original Posted By:> Love2Fly.KAP(at)gmail.com
I also love T-88 easy to use and reliable. I used it on my first Piet as well as my current Piet project. Lately I have been building a boat=2C GLen-L Sea Knight and have used T-88 on all structural parts.Craig> Subject: Pietenpol-List: Re: T-88 in the heat