Original Posted By: Warren D. Shoun
Good day all,Getting there little by little. Have covered and taped both ailerons sincecoming back from Brodhead. Am working at reduced pace now due to August 15extension deadline. I am reassembling fittings to fuselage prior tocovering. Lots of fiddling work as some have to be re-painted. Itsdifferent this time because I am cotter-keying and safetying everything.This ain't no trial assembly.My registration papers go in to the FAA today. I must think I'll finish oneof these days!Any of y'all have any experience spraying Poly-Tone over metal. Iunderstand it gets mixed results. I am thinking of spraying the struts withblack enamel as they will get handled so much.John-----Original Message-----
Pietenpol-List: Registration
Pietenpol-List: Re: Registration
Original Posted By: Michael D Cuy
Subject: Pietenpol-List: Re: Registration>Black Rust0leum will look good over a period of time, and help protect the>struts at the same time. Would suggest a good acid wash followed by a>thorough rinse and warm air blow dry before priming/painting. Are yougoing>to go the Latex route on the paint, for "period authenticity"?>________________________________________________________________________________
Subject: Pietenpol-List: Re: Registration>Black Rust0leum will look good over a period of time, and help protect the>struts at the same time. Would suggest a good acid wash followed by a>thorough rinse and warm air blow dry before priming/painting. Are yougoing>to go the Latex route on the paint, for "period authenticity"?>________________________________________________________________________________
Pietenpol-List: Re: Registration
Original Posted By: Ed0248(at)aol.com
Black Rust0leum will look good over a period of time, and help protect thestruts at the same time. Would suggest a good acid wash followed by athorough rinse and warm air blow dry before priming/painting. Are you goingto go the Latex route on the paint, for "period authenticity"?________________________________________________________________________________
Black Rust0leum will look good over a period of time, and help protect thestruts at the same time. Would suggest a good acid wash followed by athorough rinse and warm air blow dry before priming/painting. Are you goingto go the Latex route on the paint, for "period authenticity"?________________________________________________________________________________
Pietenpol-List: Re: Registration
Original Posted By: Ed0248(at)aol.com
Ed,Am following the Poly-Fiber / Stits thing all the way through. We'll usethe Poly-Tone. Only doubts are about sticking the Poly-Tone to metal.John-----Original Message-----
Ed,Am following the Poly-Fiber / Stits thing all the way through. We'll usethe Poly-Tone. Only doubts are about sticking the Poly-Tone to metal.John-----Original Message-----