Original Posted By: mboynton(at)excite.com
>He sold me a block with the crank and cam together for a very good price. The block was already helicoiled for new studs. I bought new upper studs from him. The studs go in too easy (fingers). The question I had for him is about the fit of these studs. I can't get an answer and the fit does not seem right. The studs do not go in straight either. I don't know if this is a problem or not. The block came with the bell housing already cut and in place. The crank was threaded. He does seem very knowledgable to me, too and easy to work with. I just wish I could get in contact as I have everything else ready to go.William Koucky________________________________________________________________________________