Original Posted By: Dror Kalish
Now that I have the shop and benches set up, tools in place and a nicepile of 5/4 lumber, when I re-saw the lumber into cap strips do I wantverticle grain or flat grain showing on the 1/2" side? I seems to methat the verticle grain would be stronger but the flat grain certainlybends nicer.At least this question is one I know someone has a for sure answer.ThnxRon GipsonNow that I have the shop and benches set up, tools in place and anice pileof 5/4 lumber, when I re-saw the lumber into cap strips do I wantverticle grainor flat grain showing on the 1/2" side?I seems to methat theverticle grain would be stronger but the flat grain certainly bendsnicer.At least this question is one I know someone has a for sureanswer.ThnxRon Gipson________________________________________________________________________________
Pietenpol-List: Cap Strips
Pietenpol-List: Cap Strips
Original Posted By: Steve Eldredge
Honestly I used some of both. For the ribs, I used what worked best to getthe most out of my board. Those that were to be bent I used the flat grain,since like you said it bends easier. Steve (Stainless control cable) E.-----Original Message-----GipsonSent: Monday, August 30, 1999 11:16 PMSubject: Pietenpol-List: Cap StripsNow that I have the shop and benches set up, tools in place and a nice pileof 5/4 lumber, when I re-saw the lumber into cap strips do I want verticlegrain or flat grain showing on the 1/2" side? I seems to me that theverticle grain would be stronger but the flat grain certainly bends nicer.At least this question is one I know someone has a for sure answer.ThnxRon Gipson________________________________________________________________________________
Honestly I used some of both. For the ribs, I used what worked best to getthe most out of my board. Those that were to be bent I used the flat grain,since like you said it bends easier. Steve (Stainless control cable) E.-----Original Message-----GipsonSent: Monday, August 30, 1999 11:16 PMSubject: Pietenpol-List: Cap StripsNow that I have the shop and benches set up, tools in place and a nice pileof 5/4 lumber, when I re-saw the lumber into cap strips do I want verticlegrain or flat grain showing on the 1/2" side? I seems to me that theverticle grain would be stronger but the flat grain certainly bends nicer.At least this question is one I know someone has a for sure answer.ThnxRon Gipson________________________________________________________________________________
Pietenpol-List: Re: Cap Strips
Original Posted By: C10K100(at)aol.com
hello !please delete me from the mailing list.thank you________________________________________________________________________________
hello !please delete me from the mailing list.thank you________________________________________________________________________________